FT232RL-REEL vs CY7C65213-32LTXI Comparaison
Comparaison détaillée côte à côte de FT232RL-REEL par FTDI et CY7C65213-32LTXI par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | FT232RL-REEL | CY7C65213-32LTXI |
|---|---|---|
| Marque | FTDI | Infineon |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Fonction | USB to UART serial bridge | — |
| USB Standard | USB 2.0 Full Speed (12 Mbps) | USB 2.0 Full-Speed |
| Data Rate (UART) | 300 baud to 3 Mbaud | — |
| Supply Voltage (VCC) | 3.3 V to 5.25 V | — |
| Logic I/O Voltage | 1.8 V to 5.25 V | — |
| Supply Current (typical) | 25 mA | — |
| Température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | SSOP-28 (208 mil) | 32-QFN |
| Type de montage | Surface Mount | Surface mount |
| Nombre de broches | 28 | — |
| On-chip EEPROM | 1 KB | — |
| Internal Oscillator | 12 MHz (with optional external clock) | — |
| Transmit Buffer | 16 bytes | — |
| Receive Buffer | 16 bytes | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI | — |
| CBUS Pins | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) | — |
| Internal LDO | 3.3 V for USB transceiver | — |
| Drivers | VCP, D2XX (multi-platform) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Niveau MSL | 1 | — |
| Product Type | — | USB-to-UART bridge controller |
| UART Maximum Data Rate | — | 3 Mbps |
| GPIO Count | — | 8 GPIOs |
| Serial Interface Support | — | RS232/RS422 |
| Package Dimensions | — | 5 mm × 5 mm |
| USB Suspend Support | — | SLEEP# asserted during USB suspend |
| Power Architecture | — | Fully integrated USB-to-UART bridge |
| Legacy UART Upgrade | — | Supports upgrading UART-based devices to USB |
| Operating Voltage | — | [DATA_NEEDED: operating voltage] |
| UART Electrical Levels | — | [DATA_NEEDED: UART logic levels] |
| Clock or Crystal Requirement | — | [DATA_NEEDED: clock or crystal requirement] |
| USB Bus-Powered Suspend Current | — | [DATA_NEEDED: suspend current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |