FT232RL-REEL vs CY7C65213-32LTXI तुलना
विस्तृत दोनों ओर की तुलना FT232RL-REEL द्वारा FTDI और CY7C65213-32LTXI द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | FT232RL-REEL | CY7C65213-32LTXI |
|---|---|---|
| ब्रांड | FTDI | Infineon |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | Obsolete | सक्रिय |
| फ़ंक्शन | USB to UART serial bridge | — |
| USB Standard | USB 2.0 Full Speed (12 Mbps) | USB 2.0 Full-Speed |
| Data Rate (UART) | 300 baud to 3 Mbaud | — |
| Supply Voltage (VCC) | 3.3 V to 5.25 V | — |
| Logic I/O Voltage | 1.8 V to 5.25 V | — |
| Supply Current (typical) | 25 mA | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SSOP-28 (208 mil) | 32-QFN |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| पिन की संख्या | 28 | — |
| On-chip EEPROM | 1 KB | — |
| Internal Oscillator | 12 MHz (with optional external clock) | — |
| Transmit Buffer | 16 bytes | — |
| Receive Buffer | 16 bytes | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI | — |
| CBUS Pins | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) | — |
| Internal LDO | 3.3 V for USB transceiver | — |
| Drivers | VCP, D2XX (multi-platform) | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| MSL स्तर | 1 | — |
| Product Type | — | USB-to-UART bridge controller |
| UART Maximum Data Rate | — | 3 Mbps |
| GPIO Count | — | 8 GPIOs |
| Serial Interface Support | — | RS232/RS422 |
| Package Dimensions | — | 5 mm × 5 mm |
| USB Suspend Support | — | SLEEP# asserted during USB suspend |
| Power Architecture | — | Fully integrated USB-to-UART bridge |
| Legacy UART Upgrade | — | Supports upgrading UART-based devices to USB |
| Operating Voltage | — | [DATA_NEEDED: operating voltage] |
| UART Electrical Levels | — | [DATA_NEEDED: UART logic levels] |
| Clock or Crystal Requirement | — | [DATA_NEEDED: clock or crystal requirement] |
| USB Bus-Powered Suspend Current | — | [DATA_NEEDED: suspend current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |