ICL7136CQH+D vs ICL7136CMH Comparaison

Comparaison détaillée côte à côte de ICL7136CQH+D par Analog Devices et ICL7136CMH par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
ICL7136CQH+D ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D ✓ Actif
Analog Devices
ICL7136CMH ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH ✓ Actif

Comparaison des spécifications

Paramètre ICL7136CQH+D ICL7136CMH
Marque Analog Devices Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Converter Type Dual-slope A/D converter —
Résolution 3.5 digits 3.5 digits
Architecture 1-channel, 1-function ADC —
Input Configuration True differential input —
Reference Configuration True differential reference —
Output Format BCD, 4-bit, parallel output —
Display Output Integrated LCD driver 3.5-digit, seven-segment display driver
Power Class Low-power A/D converter —
Periodic Interference Rejection Automatic dual-slope rejection —
Overrange Recovery Zero-integrator phase —
Ratiometric Measurement Supported —
Package Type 44-pin PLCC MQFP-44 (10 mm × 10 mm)
Package Dimensions 16.59 mm x 16.59 mm —
Package Code QCCJ —
Terminal Form J-bend —
Number of Terminals 44 —
Statut RoHS [DATA_NEEDED: RoHS status] RoHS compliant
REACH Status [DATA_NEEDED: REACH status] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
Plage de tension d'entrée [DATA_NEEDED: input voltage range] —
Reference Voltage Range [DATA_NEEDED: reference voltage range] —
Conversion Time [DATA_NEEDED: conversion time] —
Input Impedance [DATA_NEEDED: input impedance] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Normal Mode Rejection [DATA_NEEDED: normal-mode rejection] —
Offset Error [DATA_NEEDED: offset error] —
Gain Error [DATA_NEEDED: gain error] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
ADC Type — 3.5-digit dual-slope A/D converter
Number of Input Channels — 1 channel
Input Architecture — True differential
Reference Architecture — Differential reference
Calibration — Automatic calibration
Tension d'alimentation de fonctionnement — 9 V
Power Dissipation — 500 mW (1/2 W)
Minimum Operating Temperature — 0 °C
Maximum Operating Temperature — 70 °C
Nombre de broches — 44 pins
Type de montage — Surface mount
Screening Level — Commercial
Technology — CMOS

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis