ICL7136CQH+D vs ICL7136CMH 비교

다음의 상세 나란히 비교: ICL7136CQH+D 제조: Analog Devices 및 ICL7136CMH 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
ICL7136CQH+D ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D - 3.5-Digit Dual-Slope ADC | Analog Devices

ICL7136CQH+D ✓ 활성
Analog Devices
ICL7136CMH ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH - Low-Power 3.5-Digit ADC | Analog Devices

ICL7136CMH ✓ 활성

사양 비교

파라미터 ICL7136CQH+D ICL7136CMH
브랜드 Analog Devices Analog Devices
카테고리 ADC/DAC ADC/DAC
수명 주기 상태 활성 활성
Converter Type Dual-slope A/D converter —
분해능 3.5 digits 3.5 digits
Architecture 1-channel, 1-function ADC —
Input Configuration True differential input —
Reference Configuration True differential reference —
Output Format BCD, 4-bit, parallel output —
Display Output Integrated LCD driver 3.5-digit, seven-segment display driver
Power Class Low-power A/D converter —
Periodic Interference Rejection Automatic dual-slope rejection —
Overrange Recovery Zero-integrator phase —
Ratiometric Measurement Supported —
Package Type 44-pin PLCC MQFP-44 (10 mm × 10 mm)
Package Dimensions 16.59 mm x 16.59 mm —
Package Code QCCJ —
Terminal Form J-bend —
Number of Terminals 44 —
RoHS 상태 [DATA_NEEDED: RoHS status] RoHS compliant
REACH Status [DATA_NEEDED: REACH status] —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
Supply Voltage Range [DATA_NEEDED: supply voltage range] —
입력 전압 범위 [DATA_NEEDED: input voltage range] —
Reference Voltage Range [DATA_NEEDED: reference voltage range] —
Conversion Time [DATA_NEEDED: conversion time] —
Input Impedance [DATA_NEEDED: input impedance] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Normal Mode Rejection [DATA_NEEDED: normal-mode rejection] —
Offset Error [DATA_NEEDED: offset error] —
Gain Error [DATA_NEEDED: gain error] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
ADC Type — 3.5-digit dual-slope A/D converter
Number of Input Channels — 1 channel
Input Architecture — True differential
Reference Architecture — Differential reference
Calibration — Automatic calibration
동작 공급 전압 — 9 V
Power Dissipation — 500 mW (1/2 W)
Minimum Operating Temperature — 0 °C
Maximum Operating Temperature — 70 °C
핀 수 — 44 pins
실장 유형 — Surface mount
Screening Level — Commercial
Technology — CMOS

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청