INA101HP-1 vs INA101HP Comparaison
Comparaison détaillée côte à côte de INA101HP-1 par Texas Instruments et INA101HP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA101HP-1 | INA101HP |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Instrumentation amplifier | — |
| Amplifier Configuration | 1 circuit | — |
| Internal Operational Amplifier Count | 3 amplifiers | — |
| Gain Range | 1 V/V to 1000 V/V | 1 V/V to 1000 V/V (single resistor RG) |
| Gain-Bandwidth Product at Unity Gain | 300 kHz | — |
| Input Offset Voltage | 25 uV maximum | — |
| Input Voltage Drift | 0.25 uV/degree C maximum | — |
| Low Nonlinearity | 0.002% | — |
| Input Noise | 13 nV/sqrt(Hz) | — |
| Input Impedance | 10 Gohm | 10^10 ohm |
| Tension d'alimentation | 5 V to 20 V | — |
| Common-Mode Rejection at 60 Hz | [DATA_NEEDED: minimum CMRR value in dB] | — |
| Package Type | 14-pin PDIP | — |
| Type de montage | Through-hole | Through Hole |
| Integrated Precision Resistors | Laser-trimmed metal-film resistors | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS Status] |
| REACH Status | unknown | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range in degrees C] | — |
| Maximum Total Supply Voltage | [DATA_NEEDED: maximum total supply voltage in V] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range in V] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing in V] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 |
| Offset Voltage (Max) | — | 25 uV |
| Offset Drift (Max) | — | 0.25 uV/C |
| Nonlinearity (Max) | — | 0.002% |
| Input Noise Density | — | 13 nV/Hz |
| Slew Rate | — | 0.04 V/us |
| Bandwidth | — | 300 kHz |
| Supply Voltage Range | — | +/-5 V to +/-20 V |
| CMRR | — | High CMR at 60 Hz |
| Architecture | — | Bipolar, three-op-amp topology |
| Boîtier | — | 14-PDIP (N), through-hole |
| Température de fonctionnement | — | [DATA_NEEDED: Operating Temperature Range] |