INA101HP-1 vs INA101HP Comparação
Comparação detalhada lado a lado de INA101HP-1 por Texas Instruments e INA101HP por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | INA101HP-1 | INA101HP |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Instrumentation amplifier | — |
| Amplifier Configuration | 1 circuit | — |
| Internal Operational Amplifier Count | 3 amplifiers | — |
| Gain Range | 1 V/V to 1000 V/V | 1 V/V to 1000 V/V (single resistor RG) |
| Gain-Bandwidth Product at Unity Gain | 300 kHz | — |
| Input Offset Voltage | 25 uV maximum | — |
| Input Voltage Drift | 0.25 uV/degree C maximum | — |
| Low Nonlinearity | 0.002% | — |
| Input Noise | 13 nV/sqrt(Hz) | — |
| Input Impedance | 10 Gohm | 10^10 ohm |
| Tensão de alimentação | 5 V to 20 V | — |
| Common-Mode Rejection at 60 Hz | [DATA_NEEDED: minimum CMRR value in dB] | — |
| Package Type | 14-pin PDIP | — |
| Tipo de montagem | Through-hole | Through Hole |
| Integrated Precision Resistors | Laser-trimmed metal-film resistors | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS Status] |
| REACH Status | unknown | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range in degrees C] | — |
| Maximum Total Supply Voltage | [DATA_NEEDED: maximum total supply voltage in V] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range in V] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing in V] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 |
| Offset Voltage (Max) | — | 25 uV |
| Offset Drift (Max) | — | 0.25 uV/C |
| Nonlinearity (Max) | — | 0.002% |
| Input Noise Density | — | 13 nV/Hz |
| Slew Rate | — | 0.04 V/us |
| Bandwidth | — | 300 kHz |
| Supply Voltage Range | — | +/-5 V to +/-20 V |
| CMRR | — | High CMR at 60 Hz |
| Architecture | — | Bipolar, three-op-amp topology |
| Encapsulamento | — | 14-PDIP (N), through-hole |
| Temperatura de operação | — | [DATA_NEEDED: Operating Temperature Range] |