INA101SM vs INA101AM Comparaison
Comparaison détaillée côte à côte de INA101SM par Texas Instruments et INA101AM par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ ActifComparaison des spécifications
| Paramètre | INA101SM | INA101AM |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | Very high accuracy instrumentation amplifier | Instrumentation Amplifier |
| Number of Circuits | 1 circuit | — |
| Internal Architecture | 3 precision operational amplifiers with laser-trimmed metal-film resistors | — |
| Maximum Input Offset Voltage | 25 uV max | — |
| Maximum Input Drift | 0.25 uV/°C max | — |
| Low Nonlinearity | 0.002% | — |
| Input Noise Density | 13 nV/√Hz | — |
| High Common-Mode Rejection | Specified at 60 Hz | — |
| High Input Impedance | 10^10 ohm | — |
| Minimum Dual Supply Voltage | ±5 V | — |
| Typical Dual Supply Voltage | ±15 V | — |
| Maximum Dual Supply Voltage | ±20 V | — |
| Maximum Power Dissipation | 600 mW | — |
| Boîtier | TO-100-10, through-hole | TO-100-10 |
| Process Technology | Monolithic integrated circuit | — |
| Type de montage | Through-hole | Through-hole |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 1 channel |
| Architecture | — | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Input Type | — | Differential |
| Supply Voltage Range | — | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] |
| Maximum Supply Voltage | — | ±20 V |
| Offset Voltage | — | 25 mV maximum |
| Input Drift | — | 0.25 mV/°C maximum |
| Nonlinearity | — | 0.002% |
| Densité de bruit | — | 13 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB at 60 Hz |
| Input Impedance | — | 10 GΩ |
| Bandwidth | — | Approximately 300 kHz |
| Application Areas | — | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |