INA101SM vs INA101AM Perbandingan
Perbandingan bersamaan detil INA101SM dari Texas Instruments dan INA101AM dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA101SM | INA101AM |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Unknown | Aktif |
| Product Type | Very high accuracy instrumentation amplifier | Instrumentation Amplifier |
| Number of Circuits | 1 circuit | — |
| Internal Architecture | 3 precision operational amplifiers with laser-trimmed metal-film resistors | — |
| Maximum Input Offset Voltage | 25 uV max | — |
| Maximum Input Drift | 0.25 uV/°C max | — |
| Low Nonlinearity | 0.002% | — |
| Input Noise Density | 13 nV/√Hz | — |
| High Common-Mode Rejection | Specified at 60 Hz | — |
| High Input Impedance | 10^10 ohm | — |
| Minimum Dual Supply Voltage | ±5 V | — |
| Typical Dual Supply Voltage | ±15 V | — |
| Maximum Dual Supply Voltage | ±20 V | — |
| Maximum Power Dissipation | 600 mW | — |
| Paket | TO-100-10, through-hole | TO-100-10 |
| Process Technology | Monolithic integrated circuit | — |
| Tipe Mounting | Through-hole | Through-hole |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Channels | — | 1 channel |
| Architecture | — | Three precision operational amplifiers with laser-trimmed metal-film resistors |
| Input Type | — | Differential |
| Supply Voltage Range | — | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] |
| Maximum Supply Voltage | — | ±20 V |
| Offset Voltage | — | 25 mV maximum |
| Input Drift | — | 0.25 mV/°C maximum |
| Nonlinearity | — | 0.002% |
| Tetesan Bising | — | 13 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB at 60 Hz |
| Input Impedance | — | 10 GΩ |
| Bandwidth | — | Approximately 300 kHz |
| Application Areas | — | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |