INA118PB vs INA128P Comparaison
Comparaison détaillée côte à côte de INA118PB par Texas Instruments et INA128P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA118PB - Precision Instrumentation Amplifier | Texas Instruments
INA118PB ✓ ActifComparaison des spécifications
| Paramètre | INA118PB | INA128P |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 110 dB at G = 1000 | — |
| Maximum Input Voltage | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Single-Supply Voltage | 1.35 V | — |
| Minimum Dual-Supply Voltage | ±2.25 V | — |
| Courant de repos | 350 uA | 700 µA |
| Gain Range | 1 to 10,000 | — |
| Bandwidth at Gain of 100 | 70 kHz | — |
| Plage de température de fonctionnement | -40°C to +85°C | — |
| Boîtier | 8-pin plastic DIP | 8-pin plastic DIP (PDIP) |
| Type de montage | Through-hole | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Common-Mode Rejection Ratio | — | 130 dB minimum |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Slew Rate | — | 4 V/µs |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |