INA118PB vs INA128P 比較
詳細並排比較 INA118PB 由 Texas Instruments 與 INA128P 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | INA118PB | INA128P |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Number of Amplifiers | 1 circuit | — |
| Architecture | Three-op-amp design | Three-op-amp instrumentation amplifier |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Voltage Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 110 dB at G = 1000 | — |
| Maximum Input Voltage | ±40 V | — |
| Maximum Supply Voltage | ±18 V | — |
| Minimum Single-Supply Voltage | 1.35 V | — |
| Minimum Dual-Supply Voltage | ±2.25 V | — |
| 靜態電流 | 350 uA | 700 µA |
| Gain Range | 1 to 10,000 | — |
| Bandwidth at Gain of 100 | 70 kHz | — |
| 工作溫度範圍 | -40°C to +85°C | — |
| 封裝 | 8-pin plastic DIP | 8-pin plastic DIP (PDIP) |
| 安裝類型 | Through-hole | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Common-Mode Rejection Ratio | — | 130 dB minimum |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Slew Rate | — | 4 V/µs |
| 工作溫度 | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |