INA121U vs INA128U Comparaison
Comparaison détaillée côte à côte de INA121U par Texas Instruments et INA128U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA121U - Low-Power FET Instrumentation Amplifier | Texas Instruments
INA121U UnknownComparaison des spécifications
| Paramètre | INA121U | INA128U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | FET-input, low-power instrumentation amplifier | — |
| Number of Channels | 1 circuit | — |
| Input Bias Current | ±4 pA | — |
| Courant de repos | ±450 µA | 700 µA |
| Input Offset Voltage | ±200 µV | — |
| Input Offset Drift | ±2 µV/°C | — |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection | 106 dB | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Bandwidth | 600 kHz | — |
| Nonlinearity Error | 0.001% | — |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Application Category | Instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Device Type | — | Precision low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 amplifier |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Gain Range | — | 1 to 100,000 |
| Bandwidth at Gain 100 | — | 200 kHz |
| Maximum Slew Rate | — | 4 V/µs |
| Maximum Gain-Bandwidth Product | — | 1.3 MHz |
| Plage de température de fonctionnement | — | -40°C to +85°C |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |