INA121U vs INA128U Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA121U sa pamamagitan ng Texas Instruments at INA128U sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA121U - Low-Power FET Instrumentation Amplifier | Texas Instruments
INA121U UnknownPagsanggunian na paghahambing
| Parametro | INA121U | INA128U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Unknown | Aktibo |
| Product Type | FET-input, low-power instrumentation amplifier | — |
| Number of Channels | 1 circuit | — |
| Input Bias Current | ±4 pA | — |
| Kuru-kuryente ng Kapayapaan | ±450 µA | 700 µA |
| Input Offset Voltage | ±200 µV | — |
| Input Offset Drift | ±2 µV/°C | — |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection | 106 dB | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Bandwidth | 600 kHz | — |
| Nonlinearity Error | 0.001% | — |
| Temperature na Operasyon | -40 °C to +85 °C | — |
| Packhaging | 8-pin SOIC | 8-pin SOIC |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Application Category | Instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp instrumentation amplifier |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Tindminan RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Device Type | — | Precision low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 amplifier |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Offset Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Input Protection Range | — | ±40 V |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Gain Range | — | 1 to 100,000 |
| Bandwidth at Gain 100 | — | 200 kHz |
| Maximum Slew Rate | — | 4 V/µs |
| Maximum Gain-Bandwidth Product | — | 1.3 MHz |
| Hanay ng Temperature na Operasyon | — | -40°C to +85°C |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |