INA122P vs INA122PA Comparaison
Comparaison détaillée côte à côte de INA122P par Texas Instruments et INA122PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActifComparaison des spécifications
| Paramètre | INA122P | INA122PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | — |
| Courant de repos | 60 µA | 60 uA |
| Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Range | ±18 V | — |
| Common-Mode Range | V− − 0.1 V | — |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Low Offset Voltage | 250 µV maximum | — |
| Low Offset Drift | 3 µV/°C maximum | — |
| Circuit Count | 1 circuit | — |
| Boîtier | 8-pin plastic DIP (8-PDIP) | 8-pin PDIP (P) |
| Type de montage | Through-hole | Through-hole |
| Température de fonctionnement | −40 °C to +85 °C | — |
| Application Category | Portable medical and data-acquisition instrumentation | — |
| Signal Type | Differential | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Amplifier Type | — | Instrumentation amplifier, two-op-amp design |
| Number of Channels | — | 1 |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Common-Mode Rejection Ratio | — | 90 dB |
| Gain Range | — | 5 V/V to 10,000 V/V |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |