INA122P vs INA122PA Comparación
Comparación detallada lado a lado de INA122P por Texas Instruments y INA122PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActivoComparación de especificaciones
| Parámetro | INA122P | INA122PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | — |
| Corriente en reposo | 60 µA | 60 uA |
| Supply Voltage Range | 2.2 V to 36 V | — |
| Dual-Supply Range | ±18 V | — |
| Common-Mode Range | V− − 0.1 V | — |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Low Offset Voltage | 250 µV maximum | — |
| Low Offset Drift | 3 µV/°C maximum | — |
| Circuit Count | 1 circuit | — |
| Encapsulado | 8-pin plastic DIP (8-PDIP) | 8-pin PDIP (P) |
| Tipo de montaje | Through-hole | Through-hole |
| Temperatura de funcionamiento | −40 °C to +85 °C | — |
| Application Category | Portable medical and data-acquisition instrumentation | — |
| Signal Type | Differential | — |
| Estado RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Amplifier Type | — | Instrumentation amplifier, two-op-amp design |
| Number of Channels | — | 1 |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Common-Mode Rejection Ratio | — | 90 dB |
| Gain Range | — | 5 V/V to 10,000 V/V |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |