INA126UAG4 vs INA126UA Comparaison
Comparaison détaillée côte à côte de INA126UAG4 par Texas Instruments et INA126UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA126UA - 36V Precision MicroPower Instrumentation Amplifier | TI
INA126UA ✓ ActifComparaison des spécifications
| Paramètre | INA126UAG4 | INA126UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | — |
| Number of Channels | 1 channel | 1 channel |
| Architecture | Two-op-amp architecture | Two-op-amp instrumentation amplifier |
| Maximum Supply Voltage | 36 V | 36 V |
| Typical Dual-Supply Voltage | ±15 V | — |
| Minimum Supply Voltage | ±1.35 V | — |
| Maximum Supply Voltage from Comparison Listing | ±18 V | — |
| Courant de repos | 175 µA per channel | 175 µA per channel |
| Input Offset Voltage | 250 µV | 250 µV maximum |
| Bandwidth | 200 kHz | — |
| Minimum Operating Temperature | -40 °C | — |
| Temperature Grade | Industrial | — |
| Boîtier | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Lead Form | Gull wing | — |
| Package Code | SOP | — |
| Package Shape | Rectangular | — |
| Statut RoHS | Compliant | unknown |
| Supply Configuration | Single or dual supply | — |
| Input Signal | Differential | — |
| Gain Setting | External resistor | — |
| Amplifier Type | — | Single-channel precision instrumentation amplifier |
| Minimum Total Supply Voltage | — | 2.7 V |
| Dual-Supply Operating Range | — | ±1.35 V to ±18 V |
| Gain Bandwidth | — | 200 kHz |
| Common-Mode Rejection Ratio | — | 74 dB minimum |
| Gain Configuration | — | External resistor configuration |
| Type de montage | — | Surface mount |
| Signal Type | — | Differential input, single-ended output |
| Application Category | — | Low-noise differential signal acquisition |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |