Texas Instruments

INA126UAG4 - 36V Precision Instrumentation Amplifier | TI

Référence : INA126UAG4 ✓ Actif
36 V Vdss 175 µA per channel Id 8-pin SOIC Package ±18 V Memory
MOQ : 1 |

INA126UAG4 Présentation

The Texas Instruments INA126UAG4 is a precision, micropower instrumentation amplifier designed for accurate differential signal acquisition. Its three headline characteristics are a 36 V maximum supply capability, 175 µA typical quiescent current per channel, and 250 µV input offset voltage. The device is packaged in an 8-pin SOIC, allowing it to fit compact industrial, instrumentation, and low-power signal-conditioning designs.

An instrumentation amplifier is a specialized amplifier optimized for measuring small differential signals superimposed on a larger common-mode voltage. Its internal two-op-amp architecture provides accurate differential gain while rejecting common-mode interference. In the broader hierarchy, an instrumentation amplifier belongs to the amplifier IC category and provides a dedicated function for sensor front ends, where preserving signal integrity is more important than simply amplifying a single-ended voltage.

The INA126 family combines precision offset performance with very low power consumption. Its 175 µA per channel quiescent current supports battery-powered and portable equipment, while the 36 V supply range provides headroom for industrial measurement systems. The manufacturer identifies the device as a precision instrumentation amplifier for accurate, low-noise differential signal acquisition, with nominal gain set by an external resistor.

A two-op-amp architecture is used to establish the differential gain and reject common-mode voltage. An external gain-setting resistor lets the circuit adapt across a broad range of sensor sensitivities, while an accessible reference path can support bipolar or offset output systems. Because the INA126UAG4 is a single-channel device, systems requiring simultaneous differential measurements should use a dual-channel implementation or multiple matched devices.

Typical uses include bridge and strain-gauge signal conditioning, pressure and temperature sensor interfaces, current-shunt measurements, and low-power industrial data acquisition. The 200 kHz bandwidth identified for the INA126 family is suitable for many precision rather than high-speed signal chains. It is particularly useful when slow-changing sensor outputs must be measured accurately with limited supply current.

Designers should place input and gain-setting components close to the device, follow the manufacturer reference-circuit topology, and verify input common-mode and output-swing limits at the intended supply voltage. Input filtering should reject out-of-band interference without unnecessarily reducing bandwidth. Because gain is set externally, resistor tolerance and parasitic resistance directly affect gain accuracy and should be included in the system error budget.

This page combines manufacturer specifications, sourcing guidance, compatible-family comparisons, and practical design considerations to support faster component selection. It also identifies where application-specific verification is required before a precision measurement design is released for production.

Alternatives de remplacement direct pour INA126UAG4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec INA126UAG4 (même facteur de forme et même empreinte) — différant par Architecture, Package, Quiescent Current, Common-Mode Rejection Ratio, Device Type.

Texas Instruments
Architecture: Two-op-amp design
Package: 8-pin SOIC, 3.90 mm width
Device Type: Single-circuit micropower precision instrumentation amplifier
Comparer avec INA126UAG4 →
Texas Instruments
Architecture: Two-op-amp instrumentation amplifier
Common-Mode Rejection Ratio: 74 dB minimum
Comparer avec INA126UAG4 →
Texas Instruments
Architecture: Three-op-amp instrumentation amplifier
Quiescent Current: 700 µA
Common-Mode Rejection Ratio: 130 dB
Comparer avec INA126UAG4 →
Texas Instruments
Architecture: Three-op-amp instrumentation amplifier
Comparer avec INA126UAG4 →

INA126U

✅ Remplacement direct
Texas Instruments
📦 8-SOIC
Single-circuit micropower precision instrumentation amplifier · 36 V · ±1.35 V to ±18 V · 175 µA per channel · 250 µV · Two-op-amp design · 1 amplifier · Differential signal acquisition

Contactez-nous pour le prix

Voir la fiche technique →

INA126UA

✅ Remplacement direct
Texas Instruments
📦 8-SOIC
Single-channel precision instrumentation amplifier · 1 channel · 36 V · 2.7 V · ±1.35 V to ±18 V · 175 µA per channel · 250 µV maximum · 200 kHz

Contactez-nous pour le prix

Voir la fiche technique →

INA129U

✅ Remplacement direct
Texas Instruments
📦 8-SOIC
Precision, low-power instrumentation amplifier · Three-op-amp instrumentation amplifier · ±2.25 V to ±18 V · ±18 V · 1.3 MHz · 200 kHz · 50 µV · 0.5 µV/°C

Contactez-nous pour le prix

Voir la fiche technique →

INA128U

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 8-SOIC
Precision low-power instrumentation amplifier · Three-op-amp instrumentation amplifier · 1 amplifier · 130 dB · 120 dB · 700 µA · 50 µV · 0.5 µV/°C

Contactez-nous pour le prix

Voir la fiche technique →

INA126UAG4 Valeurs maximales et caractéristiques électriques

Product Type Precision instrumentation amplifier
Number of Channels 1 channel
Architecture Two-op-amp architecture
Maximum Supply Voltage 36 V
Typical Dual-Supply Voltage ±15 V
Minimum Supply Voltage ±1.35 V
Maximum Supply Voltage from Comparison Listing ±18 V
Courant de repos 175 µA per channel
Input Offset Voltage 250 µV
Bandwidth 200 kHz
Minimum Operating Temperature -40 °C
Temperature Grade Industrial
Boîtier 8-pin SOIC
Package Width 3.90 mm
Lead Form Gull wing
Package Code SOP
Package Shape Rectangular
Statut RoHS Compliant
Supply Configuration Single or dual supply
Input Signal Differential
Gain Setting External resistor

Guide de configuration des broches du INA126UAG4 rectangular

Configuration des broches du INA126UAG4 (boîtier rectangular). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier rectangular pour le INA126UAG4

Aucune donnée de brochage détaillée disponible pour INA126UAG4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

INA126UAG4 convient pour 6 applications: Strain-Gauge Bridge Measurement, Pressure Sensor Signal Conditioning, Battery-Powered Instrument Front End, Current-Shunt Monitoring, Temperature Sensor Acquisition, Low-Level Data Acquisition.

🏭

Strain-Gauge Bridge Measurement

The INA126UAG4 fits strain-gauge and resistive-bridge front ends that require differential excitation sensing with limited operating current. Its precision instrumentation-amplifier architecture rejects common-mode voltage present across the bridge, while the 250 µV input offset specification helps preserve measurement resolution at low bridge output levels. The 175 µA typical quiescent current per channel is also advantageous for compact industrial transducers. Configure the external gain resistor according to the manufacturer reference circuit and keep the gain-setting connection compact to minimize parasitic resistance. The 200 kHz bandwidth is suitable for many quasi-static bridge signals without requiring a high-speed differential amplifier.

🏭

Pressure Sensor Signal Conditioning

The INA126UAG4 is appropriate for bridge-based pressure transmitters where a small differential signal must be amplified while supply and sensor excitation remain low power. Its differential input arrangement reduces sensitivity to common-mode variation, and the 250 µV offset rating supports accurate measurement near the lower end of the sensor output range. The device can operate from approximately ±1.35 V in suitable dual-supply applications or from a compatible single-supply arrangement when output headroom permits. Place the external gain resistor and input filtering close to the amplifier, and verify that the pressure-sensor excitation remains within the amplifier's input common-mode range.

📱

Battery-Powered Instrument Front End

The INA126UAG4 supports portable and battery-powered measurement instruments where amplifier power can dominate available energy. Its 175 µA typical quiescent current per channel reduces the continuous burden of signal conditioning, while operation down to approximately ±1.35 V supports compact dual-rail systems. The 36 V maximum supply rating also permits use in higher-voltage instrumentation when the sensor interface requires more common-mode headroom. Choose external gain and filtering components with low leakage and account for their contribution to total system power. Confirm the output swing at the selected supply and light-load condition to avoid clipping sensor outputs near either rail.

⚡

Current-Shunt Monitoring

The INA126UAG4 can condition low-level voltage drops across a current-shunt when the measurement requires differential input, low quiescent current, and a reasonably wide supply range. A shunt signal is inherently differential, allowing common-mode supply or load voltage to be rejected more effectively than with a conventional single-ended amplifier. The 250 µV offset specification and external gain-setting arrangement are useful when resolving small shunt voltages. Install the shunt and amplifier input network so that Kelvin connections minimize copper-drop errors, and use filtering to suppress switching-node interference without degrading the intended measurement bandwidth.

🌐

Temperature Sensor Acquisition

The INA126UAG4 is well suited to low-level temperature sensor signals, particularly thermocouple, RTD, or resistive sensor networks implemented with a differential front end. Its low typical quiescent current preserves battery life in distributed monitoring equipment, while the precision offset rating supports sensor signals that occupy only a small portion of the available output range. The 200 kHz bandwidth accommodates many temperature signals that change slowly relative to the amplifier response. Apply proper cold-junction compensation for thermocouples and verify that sensor excitation, grounding, input filtering, and common-mode voltage are compatible with the INA126 operating limits.

🖥️

Low-Level Data Acquisition

The INA126UAG4 supports laboratory and industrial data-acquisition channels that measure small differential voltages with modest bandwidth requirements. Its two-op-amp instrumentation-amplifier architecture provides a defined gain path and common-mode rejection, while 175 µA typical current per channel benefits multi-channel compact designs. The 200 kHz bandwidth is appropriate for many temperature, pressure, force, and slow-motion displacement sensors rather than high-rate waveform capture. Use consistent input filtering and reference arrangements across channels, and include the gain-setting resistor tolerance and input bias-current effects in the overall accuracy calculation.

What are the key specifications of INA126UAG4?
The INA126UAG4 is a single-channel precision instrumentation amplifier with a 36 V maximum supply rating, 175 µA typical quiescent current per channel, 250 µV input offset voltage, and 200 kHz bandwidth. According to the Texas Instruments product page, it uses a two-op-amp architecture for accurate, low-noise differential signal acquisition. The device is offered in an 8-pin SOIC package for industrial-temperature signal-conditioning applications.
What is the operating voltage of INA126UAG4?
The INA126UAG4 operates from approximately ±1.35 V to ±18 V for dual-supply operation, while the Texas Instruments family description identifies a maximum supply rating of 36 V. According to the Texas Instruments product page, this broad range supports both low-voltage portable systems and higher-voltage industrial measurement circuits. The input common-mode and output-voltage limits must also remain within the device's operating region.
Where can I download the INA126UAG4 datasheet PDF?
The official INA126UAG4 technical documentation is available through the Texas Instruments INA126 product page at https://www.ti.com/product/INA126. Select the datasheet link for the complete pin description, electrical characteristics, gain-setting equations, typical application circuit, and ordering information. Use the ordering table to confirm that INA126UAG4 corresponds to the required 8-pin SOIC package and industrial temperature grade.
Where can I find the INA126UAG4 pinout?
The INA126UAG4 pinout is published in the pin-configuration section of the Texas Instruments INA126 datasheet. The component uses an 8-pin SOIC package, and its assignments include differential inputs, supply connections, output, gain-setting resistor, and reference-related functions. Before routing a PCB, use the datasheet pin-description table as the authoritative source for assigning tracks and checking the exposed functional requirements of each terminal.
Where can I buy INA126UAG4 online?
You can request a quote for INA126UAG4 through the Request a Quote form on this page. The exact orderable part is a single-channel Texas Instruments precision instrumentation amplifier in an 8-pin SOIC package. The request should specify the required quantity, shipment destination, and acceptable packaging configuration so that current commercial availability and lead time can be confirmed against the exact MPN.
What is the price of INA126UAG4?
Use the Request a Quote form on this page for the current commercial price of INA126UAG4. Pricing can depend on order quantity, inventory, package configuration, and market conditions, so a quantity-specific quote is more useful than a static figure. The request form should be populated with the required quantity and delivery location to obtain an actionable quotation for the exact Texas Instruments MPN.
What is the lead time for INA126UAG4?
Request the current lead time through the Request a Quote form on this page. Lead time depends on supplier inventory, order volume, production scheduling, and the requested shipping destination. Provide the exact MPN, quantity, and delivery date when requesting the quotation so that availability and the committed schedule can be confirmed for the INA126UAG4 rather than for a related INA126 order code.
Is INA126UAG4 in stock?
Current stock for INA126UAG4 should be confirmed through the Request a Quote form on this page. Inventory status can change independently of the component's lifecycle and may differ by package, quantity, and region. The quotation request should identify INA126UAG4 exactly and include the required quantity so that the response reflects the available 8-pin SOIC configuration and the intended shipment location.
What is the difference between INA126UAG4 and INA126U?
The INA126UAG4 and INA126U belong to the same Texas Instruments INA126 precision instrumentation-amplifier family, but their order codes must be checked against the manufacturer ordering table for package and qualification differences. According to the Texas Instruments product page, the family provides a 36 V maximum supply rating, 175 µA typical current per channel, and 250 µV offset voltage. Confirm the exact suffix before substituting one order code for the other.
What is the difference between INA126UAG4 and INA129U?
The INA126UAG4 and INA129U are related Texas Instruments precision instrumentation amplifiers, but they belong to different device families and should be compared by gain range, common-mode range, offset, bandwidth, and supply limits. The INA126UAG4 is identified as a 36 V, 175 µA-per-channel, 250 µV-offset device with 200 kHz bandwidth. Use the INA126 datasheet and the INA129 datasheet to verify that the external gain network and input limits remain compatible.
When should I choose INA126UAG4 over INA129U?
Choose INA126UAG4 when the design requires the defined INA126 gain network, 250 µV offset rating, 175 µA-per-channel quiescent current, and operation from a supply approaching the family's 36 V maximum. Choose INA129U instead when its distinct common-mode, gain, and output-swing characteristics provide a better fit. A final substitution must be checked against signal amplitude, sensor source impedance, reference arrangement, and supply conditions.
When should I choose INA126UAG4 over INA128U?
Choose INA126UAG4 when its INA126-family gain implementation, 200 kHz bandwidth, and 36 V maximum supply capability match the measurement system. Choose INA128U when its separate gain range and operating characteristics are more suitable for the sensor and available headroom. Do not rely on package similarity alone: confirm the gain resistor relationship, input common-mode range, output swing, quiescent current, and reference behavior before making a PCB-level substitution.
What can replace INA126UAG4?
The closest documented replacement path begins with the related Texas Instruments INA126 order variants and closely related 8-pin SOIC instrumentation amplifiers such as INA129U and INA128U. A valid drop-in decision requires identical pin functions, compatible gain-resistor implementation, overlapping supply and common-mode ranges, acceptable offset and bandwidth, and equivalent output drive. Use each candidate's manufacturer datasheet to complete that comparison before changing the released PCB.
Is INA126UAG4 suitable for low-power sensor acquisition?
The INA126UAG4 is suitable for many low-power differential sensor-acquisition systems because its typical quiescent current is 175 µA per channel and its supply operation can extend down to approximately ±1.35 V. According to the Texas Instruments product page, its precision offset rating is 250 µV. Suitability also depends on sensor impedance, signal bandwidth, required gain, common-mode voltage, and the available output range.
Is there a Texas Instruments cross-brand equivalent for INA126UAG4?
A verified cross-brand equivalent cannot be named from the available manufacturer and comparison information. The INA126UAG4 is a precision, micropower, 8-pin SOIC instrumentation amplifier, and many similarly packaged amplifier ICs use different pin assignments, gain networks, or common-mode limits. The Texas Instruments cross-reference search can be used to locate candidates, but each result must pass a pin-function and parameter review before being considered a drop-in replacement.

Données de référence d'ingénierie pour INA126UAG4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose INA126UAG4 for low-power differential measurements that require the defined INA126 family performance, including a 250 µV offset rating, 175 µA typical quiescent current per channel, 200 kHz bandwidth, and a 36 V maximum supply rating. It is particularly suitable for bridge sensors, pressure transmitters, current-shunt monitoring, and battery-powered instrumentation. INA126U and INA126UA are preferred first checks when only the ordering suffix needs review, provided the manufacturer ordering table confirms the same electrical and package configuration. Consider INA129U or INA128U when their distinct gain range, common-mode capability, or output behavior offers a better system fit. Any substitution must preserve pin functions, external gain calculation, input range, output swing, accuracy requirements, and the industrial temperature range. Do not select a candidate solely because it uses an 8-pin SOIC package.

Comparaison avec les alternatives

Paramètre Ce produit INA126U INA126UA INA129U INA128U
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier

Principaux différenciateurs

  • Combines precision offset performance with micropower operation (vs INA129U)
  • Supports a broad 36 V maximum supply environment (vs INA128U)
  • Uses the established INA126 two-op-amp gain architecture (vs INA126U)

Notes de conception

Verify the complete pin function, gain-setting method, input common-mode range, and output swing before treating a related INA order code as a replacement. The target uses an 8-pin SOIC package, but package equality alone does not prove electrical interchangeability. Compare the manufacturer gain equations because a changed gain relationship can alter both the selected resistor value and the resulting closed-loop accuracy.

Place the external gain resistor and input compensation or filter components close to their corresponding INA126UAG4 pins. Keep differential input traces short, matched where practical, and away from switching-node and high-current return paths. Connect the input return near the signal-source ground to prevent ground-potential differences from entering the differential input.

Choose input filtering from the required signal bandwidth rather than adding arbitrary capacitance. Excess capacitance can alter stability, phase margin, and the usable bandwidth of the closed-loop amplifier. For low-frequency sensors, place filtering mainly for antialiasing and conducted-noise control; for faster signals, use the manufacturer's gain-versus-frequency guidance to avoid degrading response.

Check output headroom under the lightest expected load. A low quiescent current does not guarantee accurate operation if the required output voltage approaches either supply rail. Also include the external gain resistor and input network when comparing total standby power, because their values can determine both current draw and signal accuracy.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is identified by the product listing. The INA126UAG4 is an industrial-temperature precision instrumentation amplifier rather than an automotive-qualified device. No additional compliance claims are made.

Données vérifiées le : 2026-11-14 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

INA126UAG4 datasheet INA126UAG4 pinout INA126UAG4 datasheet pdf INA126UAG4 specifications INA126UAG4 SOIC-8 INA126UAG4 equivalent INA126UAG4 replacement INA126UAG4 cross reference INA126UAG4 vs INA129U INA126UAG4 vs INA128U INA126UAG4 price INA126UAG4 stock Texas Instruments INA126UAG4 INA126UAG4 application circuit INA126 36V instrumentation amplifier

Composants & termes associés

Texas Instruments INA126UAG4 INA126 INA126U INA126UA INA129U INA128U precision instrumentation amplifier instrumentation amplifier amplifier IC two-op-amp architecture differential signal acquisition common-mode rejection input offset voltage quiescent current gain-setting resistor 36 V power supply 8-pin SOIC SOIC package surface-mount package strain-gauge bridge pressure sensor current-shunt monitor RoHS industrial temperature grade
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ