INA2126P vs INA2126U Comparaison
Comparaison détaillée côte à côte de INA2126P par Texas Instruments et INA2126U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ ActifTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ ActifComparaison des spécifications
| Paramètre | INA2126P | INA2126U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 channels | 2 channels |
| Architecture | Two-op-amp instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Operating Voltage Range | ±1.35 V to ±18 V | — |
| Courant de repos | 175 µA/channel | — |
| Offset Voltage | 250 µV | — |
| Input Type | Differential | — |
| Application | Low-noise differential-signal acquisition | — |
| Circuit Count | 2 circuits | — |
| Boîtier | 16-PDIP | 16-pin SOIC |
| Type de montage | Through-hole | Surface mount |
| Packaging | Tube | — |
| Product Type | Precision instrumentation amplifier | — |
| Courant d'alimentation | 350 µA for two channels | — |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Gain Range | [DATA_NEEDED: Gain range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: Gain bandwidth product] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: Common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Slew Rate | — | [DATA_NEEDED: slew rate] |