INA2126P vs INA2126U 비교
다음의 상세 나란히 비교: INA2126P 제조: Texas Instruments 및 INA2126U 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA2126P - Dual 36V Micropower Instrumentation Amplifier | Texas Instruments
INA2126P ✓ 활성Texas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ 활성사양 비교
| 파라미터 | INA2126P | INA2126U |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of Channels | 2 channels | 2 channels |
| Architecture | Two-op-amp instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Operating Voltage Range | ±1.35 V to ±18 V | — |
| 대기 전류 | 175 µA/channel | — |
| Offset Voltage | 250 µV | — |
| Input Type | Differential | — |
| Application | Low-noise differential-signal acquisition | — |
| Circuit Count | 2 circuits | — |
| 패키지 | 16-PDIP | 16-pin SOIC |
| 실장 유형 | Through-hole | Surface mount |
| Packaging | Tube | — |
| Product Type | Precision instrumentation amplifier | — |
| 공급 전류 | 350 µA for two channels | — |
| Input Bias Current | [DATA_NEEDED: Input bias current] | [DATA_NEEDED: input bias current] |
| Gain Range | [DATA_NEEDED: Gain range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: Gain bandwidth product] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: Common-mode rejection ratio] | [DATA_NEEDED: common-mode rejection ratio] |
| 동작 온도 범위 | [DATA_NEEDED: Operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Slew Rate | — | [DATA_NEEDED: slew rate] |