ISL83490IP vs ISL83485IP Comparaison

Comparaison détaillée côte à côte de ISL83490IP par Renesas Electronics et ISL83485IP par Renesas Electronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Renesas Electronics
ISL83490IP ISL83490IP - 3.3V Full-Duplex RS-485 Transceiver | Renesas

ISL83490IP - 3.3V Full-Duplex RS-485 Transceiver | Renesas

ISL83490IP ✓ Actif
Renesas Electronics
ISL83485IP ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP - 3.3V 10Mbps Half-Duplex RS-485/RS-422 | Renesas

ISL83485IP ✓ Actif

Comparaison des spécifications

Paramètre ISL83490IP ISL83485IP
Marque Renesas Electronics Renesas Electronics
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver IC RS-485/RS-422 transceiver
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Duplex Mode Full duplex Half duplex
Supported Protocols RS-485 and RS-422 —
Supply Voltage Range 3 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Power Class Low power —
Signal Profile High speed or slew-rate limited —
Plage de température de fonctionnement -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Package Type 8-DIP, through hole —
Package Lead Span 0.300 inch (7.62 mm) —
Package Length [DATA_NEEDED: package body length] —
Type de montage Through-hole Through-hole
Shipping Container Tube —
Operating Temperature Grade Industrial, -40 °C to +85 °C —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Maximum Data Rate [DATA_NEEDED: maximum data rate] 10 Mbps
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] [DATA_NEEDED: common-mode voltage range]
Courant d'alimentation [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: typical and maximum supply current]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Transceiver Configuration — 1 driver / 1 receiver
Tension d'alimentation — 3.3 V
Supported Standards — RS-485 and RS-422
Process Technology — BiCMOS
Power Consumption Profile — Low power
Signal Type — Balanced differential
Boîtier — 8-pin PDIP
Driver Enable Control — [DATA_NEEDED: driver enable logic polarity and pin assignment]
Receiver Enable Control — [DATA_NEEDED: receiver enable logic polarity and pin assignment]
Maximum Supply Voltage — [DATA_NEEDED: maximum supply voltage]
Differential Input Sensitivity — [DATA_NEEDED: differential receiver sensitivity]
Maximum Driver Output Current — [DATA_NEEDED: maximum driver output current]
ESD Protection Rating — [DATA_NEEDED: ESD protection rating]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis