ISL83490IP vs ISL83485IP 比較
詳細な並列比較: ISL83490IP メーカー: Renesas Electronics および ISL83485IP メーカー: Renesas Electronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | ISL83490IP | ISL83485IP |
|---|---|---|
| ブランド | Renesas Electronics | Renesas Electronics |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | RS-485/RS-422 transceiver IC | RS-485/RS-422 transceiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Duplex Mode | Full duplex | Half duplex |
| Supported Protocols | RS-485 and RS-422 | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Power Class | Low power | — |
| Signal Profile | High speed or slew-rate limited | — |
| 動作温度範囲 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 8-DIP, through hole | — |
| Package Lead Span | 0.300 inch (7.62 mm) | — |
| Package Length | [DATA_NEEDED: package body length] | — |
| 実装タイプ | Through-hole | Through-hole |
| Shipping Container | Tube | — |
| Operating Temperature Grade | Industrial, -40 °C to +85 °C | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 10 Mbps |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| 電源電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: typical and maximum supply current] |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Transceiver Configuration | — | 1 driver / 1 receiver |
| 電源電圧 | — | 3.3 V |
| Supported Standards | — | RS-485 and RS-422 |
| Process Technology | — | BiCMOS |
| Power Consumption Profile | — | Low power |
| Signal Type | — | Balanced differential |
| パッケージ | — | 8-pin PDIP |
| Driver Enable Control | — | [DATA_NEEDED: driver enable logic polarity and pin assignment] |
| Receiver Enable Control | — | [DATA_NEEDED: receiver enable logic polarity and pin assignment] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential receiver sensitivity] |
| Maximum Driver Output Current | — | [DATA_NEEDED: maximum driver output current] |
| ESD Protection Rating | — | [DATA_NEEDED: ESD protection rating] |