ISO120G vs ISO120G-BI Comparaison
Comparaison détaillée côte à côte de ISO120G par Texas Instruments et ISO120G-BI par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI NrndComparaison des spécifications
| Paramètre | ISO120G | ISO120G-BI |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | NRND | NRND |
| Product Type | Precision low-cost isolation amplifier | Precision isolation amplifier |
| Isolation Voltage Rating | 1500 Vrms | — |
| Input Range | 50 mV | — |
| Supply Voltage Range | ±4.5 V to ±18 V | — |
| Bandwidth | 60 kHz | — |
| Nonlinearity | ±0.01% maximum | — |
| Offset Voltage Drift | 150 µV/°C maximum at 6 kHz bandwidth with two external capacitors | — |
| Partial Discharge Testing | 100% tested for partial discharge for ISO120 | — |
| Carrier Frequency | User controlled | User controlled |
| Bipolar Operation | Supported | — |
| Amplifier Count | 1 circuit | — |
| Boîtier | 16-CDIP according to the DigiKey product result; related family listing also states 24-pin hermetic DIP | 16-lead CDIP |
| Lead Count | 16 leads according to the DigiKey product result | — |
| Isolation Class | Galvanic isolation amplifier | — |
| Input Type | Bipolar analog input measurement | — |
| Type de sortie | Differential isolation amplifier output | — |
| Manufacturer Product Family | ISO120 precision low-cost isolation amplifier | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | unknown | — |
| Number of Circuits | — | 1 circuit |
| Signal Bandwidth | — | 60 kHz |
| Rated Isolation Voltage | — | 1500 Vrms |
| Maximum Nonlinearity | — | 0.01% |
| Precision Configuration Bandwidth | — | 6 kHz |
| Maximum Voltage-Offset Drift | — | 150 uV/°C |
| Input Common-Mode Rejection | — | High at 60 Hz |
| Operation | — | Bipolar |
| Partial Discharge Qualification | — | 100% tested |
| Package Pitch | — | 7.62 mm |
| Package Length | — | 0.300 inch |
| Type de montage | — | Through-hole |
| External Components for 60 kHz Bandwidth | — | None required |
| External Capacitors for Guaranteed Precision | — | 2 capacitors |
| Lifecycle Recommendation | — | Not recommended for new designs |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |