ISO120G vs ISO120G-BI 비교
다음의 상세 나란히 비교: ISO120G 제조: Texas Instruments 및 ISO120G-BI 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
ISO120G-BI - 60 kHz Precision Isolation Amplifier | Texas Instruments
ISO120G-BI Nrnd사양 비교
| 파라미터 | ISO120G | ISO120G-BI |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | NRND | NRND |
| Product Type | Precision low-cost isolation amplifier | Precision isolation amplifier |
| Isolation Voltage Rating | 1500 Vrms | — |
| Input Range | 50 mV | — |
| Supply Voltage Range | ±4.5 V to ±18 V | — |
| Bandwidth | 60 kHz | — |
| Nonlinearity | ±0.01% maximum | — |
| Offset Voltage Drift | 150 µV/°C maximum at 6 kHz bandwidth with two external capacitors | — |
| Partial Discharge Testing | 100% tested for partial discharge for ISO120 | — |
| Carrier Frequency | User controlled | User controlled |
| Bipolar Operation | Supported | — |
| Amplifier Count | 1 circuit | — |
| 패키지 | 16-CDIP according to the DigiKey product result; related family listing also states 24-pin hermetic DIP | 16-lead CDIP |
| Lead Count | 16 leads according to the DigiKey product result | — |
| Isolation Class | Galvanic isolation amplifier | — |
| Input Type | Bipolar analog input measurement | — |
| 출력 유형 | Differential isolation amplifier output | — |
| Manufacturer Product Family | ISO120 precision low-cost isolation amplifier | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | unknown | — |
| Number of Circuits | — | 1 circuit |
| Signal Bandwidth | — | 60 kHz |
| Rated Isolation Voltage | — | 1500 Vrms |
| Maximum Nonlinearity | — | 0.01% |
| Precision Configuration Bandwidth | — | 6 kHz |
| Maximum Voltage-Offset Drift | — | 150 uV/°C |
| Input Common-Mode Rejection | — | High at 60 Hz |
| Operation | — | Bipolar |
| Partial Discharge Qualification | — | 100% tested |
| Package Pitch | — | 7.62 mm |
| Package Length | — | 0.300 inch |
| 실장 유형 | — | Through-hole |
| External Components for 60 kHz Bandwidth | — | None required |
| External Capacitors for Guaranteed Precision | — | 2 capacitors |
| Lifecycle Recommendation | — | Not recommended for new designs |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |