ISO1450DW vs IL485E Comparaison
Comparaison détaillée côte à côte de ISO1450DW par Texas Instruments et IL485E par NVE Corporation. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ ActifComparaison des spécifications
| Paramètre | ISO1450DW | IL485E |
|---|---|---|
| Marque | Texas Instruments | NVE Corporation |
| Catégorie | Interface ICs | Voltage Regulators |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Isolated RS-485/RS-422 transceiver | Isolated RS-485/RS-422 Differential Bus Transceiver |
| Transceiver Configuration | 1/1 half-duplex | — |
| Maximum Data Rate | 50 Mbps | — |
| Isolation Voltage | 5 kVrms | — |
| Supply Voltage Range | 1.71 V to 5.5 V | — |
| Plage de température de fonctionnement | -40 °C to 125 °C | — |
| Boîtier | 16-pin SOIC wide-body (DW) | 16-pin wide-body SOIC (0.295 inch / 7.50 mm width) |
| Type de montage | Surface mount | Surface Mount |
| Supported Standards | TIA/EIA RS-485 and RS-422 | — |
| Differential Communication | Yes | — |
| Direction Control | Half-duplex | — |
| EMC Protection | EMC protected | — |
| Isolation Type | Galvanic isolation | — |
| Logic Compatibility | 1.71 V to 5.5 V supply operation | — |
| Manufacturer Evaluation Module | ISO1410DWEVM for related ISO1410 evaluation | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Manufacturer | — | NVE Corporation |
| Isolation Technology | — | IsoLoop spintronic GMR (Giant Magnetoresistance) |
| Isolation Voltage (Vrms) | — | 2500 Vrms |
| Data Rate (max) | — | 35 Mbps (35 Mbd) |
| Common-Mode Transient Immunity (CMTI) | — | 20 kV/microsecond |
| Number of Channels | — | 3 (TX, RX, and bus-fault / handshake) |
| Bus ESD Protection | — | 2 kV |
| Standards Compliance | — | ANSI EIA/TIA-422-B, RS-485, PROFIBUS recognized |
| Tension d'alimentation | — | [DATA_NEEDED: VCC operating range] |
| Température de fonctionnement | — | [DATA_NEEDED: temperature range] |
| Lead-Free | — | Yes |
| Propagation Delay | — | [DATA_NEEDED: tPLH / tPHL typical] |
| Fail-Safe Biasing | — | Bus-fault detection feature included |