ISO1450DW vs IL485E 比較
詳細な並列比較: ISO1450DW メーカー: Texas Instruments および IL485E メーカー: NVE Corporation。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
ISO1450DW - 50 Mbps 5 kVrms Isolated RS-485/RS-422 | Texas Instruments
ISO1450DW ✓ 生産中仕様比較
| パラメータ | ISO1450DW | IL485E |
|---|---|---|
| ブランド | Texas Instruments | NVE Corporation |
| カテゴリ | Interface ICs | Voltage Regulators |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Isolated RS-485/RS-422 transceiver | Isolated RS-485/RS-422 Differential Bus Transceiver |
| Transceiver Configuration | 1/1 half-duplex | — |
| Maximum Data Rate | 50 Mbps | — |
| Isolation Voltage | 5 kVrms | — |
| Supply Voltage Range | 1.71 V to 5.5 V | — |
| 動作温度範囲 | -40 °C to 125 °C | — |
| パッケージ | 16-pin SOIC wide-body (DW) | 16-pin wide-body SOIC (0.295 inch / 7.50 mm width) |
| 実装タイプ | Surface mount | Surface Mount |
| Supported Standards | TIA/EIA RS-485 and RS-422 | — |
| Differential Communication | Yes | — |
| Direction Control | Half-duplex | — |
| EMC Protection | EMC protected | — |
| Isolation Type | Galvanic isolation | — |
| Logic Compatibility | 1.71 V to 5.5 V supply operation | — |
| Manufacturer Evaluation Module | ISO1410DWEVM for related ISO1410 evaluation | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Manufacturer | — | NVE Corporation |
| Isolation Technology | — | IsoLoop spintronic GMR (Giant Magnetoresistance) |
| Isolation Voltage (Vrms) | — | 2500 Vrms |
| Data Rate (max) | — | 35 Mbps (35 Mbd) |
| Common-Mode Transient Immunity (CMTI) | — | 20 kV/microsecond |
| Number of Channels | — | 3 (TX, RX, and bus-fault / handshake) |
| Bus ESD Protection | — | 2 kV |
| Standards Compliance | — | ANSI EIA/TIA-422-B, RS-485, PROFIBUS recognized |
| 電源電圧 | — | [DATA_NEEDED: VCC operating range] |
| 動作温度 | — | [DATA_NEEDED: temperature range] |
| Lead-Free | — | Yes |
| Propagation Delay | — | [DATA_NEEDED: tPLH / tPHL typical] |
| Fail-Safe Biasing | — | Bus-fault detection feature included |