ITS4090QEPDXUMA1 vs TLD700216ESXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4090QEPDXUMA1 par Infineon et TLD700216ESXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4090QEPDXUMA1 | TLD700216ESXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power Distribution Switches | LED Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $2,18 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Linear LED Driver IC |
| Family | PROFET (PROtected FET) 24V/48V | LITIX Pixel Rear |
| Number of Channels | 4 | — |
| Topologie | High-Side Switch (N-Channel DMOS) | Linear constant-current sink |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | -40 C to +125 C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-5 (TSSOP-24-EP, 150 mil) |
| Type de montage | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | Compliant |
| Number of Output Channels | — | 16 |
| Maximum Output Current per Channel | — | 76.5 mA |
| PWM Dimming Resolution | — | 14-bit (16384 steps) |
| Analog Dimming | — | Yes (current setting via ISET) |
| Supply Voltage Range (VS) | — | 6 V to 20 V |
| Load Dump Tolerance | — | 40 V |
| Communication Interface | — | SPI with daisy-chain |
| Diagnostic Features | — | Open-load, short-to-GND, short-to-VS, overtemperature |
| Functional Safety | — | ISO 26262 ASIL-B capable |