ITS4090QEPDXUMA1 vs TLD700216ESXUMA1 Comparação
Comparação detalhada lado a lado de ITS4090QEPDXUMA1 por Infineon e TLD700216ESXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | ITS4090QEPDXUMA1 | TLD700216ESXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power Distribution Switches | LED Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,62 | $2,18 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Linear LED Driver IC |
| Family | PROFET (PROtected FET) 24V/48V | LITIX Pixel Rear |
| Number of Channels | 4 | — |
| Topologia | High-Side Switch (N-Channel DMOS) | Linear constant-current sink |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Faixa de temperatura de operação | -40 °C to +150 °C (Tj) | -40 C to +125 C |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-TSDSO-24-5 (TSSOP-24-EP, 150 mil) |
| Tipo de montagem | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Nível MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Compliant | Compliant |
| Number of Output Channels | — | 16 |
| Maximum Output Current per Channel | — | 76.5 mA |
| PWM Dimming Resolution | — | 14-bit (16384 steps) |
| Analog Dimming | — | Yes (current setting via ISET) |
| Supply Voltage Range (VS) | — | 6 V to 20 V |
| Load Dump Tolerance | — | 40 V |
| Communication Interface | — | SPI with daisy-chain |
| Diagnostic Features | — | Open-load, short-to-GND, short-to-VS, overtemperature |
| Functional Safety | — | ISO 26262 ASIL-B capable |