KSZ8041RNL-TR vs KSZ8051RNL Comparaison

Comparaison détaillée côte à côte de KSZ8041RNL-TR par Microchip Technology et KSZ8051RNL par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8051RNL KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL ✓ Actif

Comparaison des spécifications

Paramètre KSZ8041RNL-TR KSZ8051RNL
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Ethernet PHYs
Statut du cycle de vie Actif Actif
Product Type 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mb/s and 100 Mb/s —
Host Interface Full RMII —
Number of Drivers/Receivers 1/1 —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply —
Input Reference Clock 25 MHz crystal —
RMII Reference Output 50 MHz to the media access controller —
External 50 MHz System Clock Not required for the RNL version —
Boîtier 32-VFQFN exposed-pad package, 5 mm x 5 mm 32-pin QFN, 5 mm x 5 mm
Type de montage Surface mount Surface mount
Lead-Free Package Option Yes, 32-pin lead-free QFN package —
Power-Down Configuration Configurable through power-up strapping —
Speed and Duplex Configuration Configurable through power-up strapping —
Auto-Negotiation Configuration Configurable through power-up strapping —
PHY Address Configuration Configurable through power-up strapping —
Ethernet Magnetics External 10/100BASE-TX magnetic isolation required —
Statut RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Manufacturer — Microchip Technology
Supported Ethernet Speeds — 10 Mbps and 100 Mbps
MAC Interface — RMII
Supply Type — Single supply
Nominal Supply Voltage — 3.3 V
Automotive Qualification — AEC-Q100 standard qualified
Termination — 10BASE-T on-chip termination resistors
Management Interface — MDC/MDIO management
RMII Reference Clock — 50 MHz
Nombre de broches — 32 pins
Lead Finish — Lead-free
Ethernet Cable Type — Twisted-pair 10BASE-T/100BASE-TX
Plage de température de fonctionnement — [DATA_NEEDED: operating temperature range]
Maximum Data Rate — 100 Mbps

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis