KSZ8041RNL-TR vs KSZ8051RNL Karşılaştırma

Ayrıntılı yan yana karşılaştırma KSZ8041RNL-TR tarafından Microchip Technology ve KSZ8051RNL tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
KSZ8051RNL KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL - 100BASE-TX Ethernet PHY | Microchip | Automotive

KSZ8051RNL ✓ Aktif

Özellik Karşılaştırması

Parametre KSZ8041RNL-TR KSZ8051RNL
Marka Microchip Technology Microchip Technology
Kategori Interface ICs Ethernet PHYs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type 10BASE-T/100BASE-TX physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Data Rate 10 Mb/s and 100 Mb/s —
Host Interface Full RMII —
Number of Drivers/Receivers 1/1 —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply —
Input Reference Clock 25 MHz crystal —
RMII Reference Output 50 MHz to the media access controller —
External 50 MHz System Clock Not required for the RNL version —
Paket 32-VFQFN exposed-pad package, 5 mm x 5 mm 32-pin QFN, 5 mm x 5 mm
Montaj Türü Surface mount Surface mount
Lead-Free Package Option Yes, 32-pin lead-free QFN package —
Power-Down Configuration Configurable through power-up strapping —
Speed and Duplex Configuration Configurable through power-up strapping —
Auto-Negotiation Configuration Configurable through power-up strapping —
PHY Address Configuration Configurable through power-up strapping —
Ethernet Magnetics External 10/100BASE-TX magnetic isolation required —
RoHS Durumu [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
Manufacturer — Microchip Technology
Supported Ethernet Speeds — 10 Mbps and 100 Mbps
MAC Interface — RMII
Supply Type — Single supply
Nominal Supply Voltage — 3.3 V
Automotive Qualification — AEC-Q100 standard qualified
Termination — 10BASE-T on-chip termination resistors
Management Interface — MDC/MDIO management
RMII Reference Clock — 50 MHz
Pin Sayısı — 32 pins
Lead Finish — Lead-free
Ethernet Cable Type — Twisted-pair 10BASE-T/100BASE-TX
İşletim Sıcaklığı Aralığı — [DATA_NEEDED: operating temperature range]
Maximum Data Rate — 100 Mbps

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin