KSZ8041TL-S vs KSZ8041TL-TR Comparaison

Comparaison détaillée côte à côte de KSZ8041TL-S par Microchip Technology et KSZ8041TL-TR par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ8041TL-S KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S - 10/100 Ethernet PHY | Microchip Technology

KSZ8041TL-S ✓ Actif
Microchip Technology
KSZ8041TL-TR KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)

KSZ8041TL-TR ✓ Actif

Comparaison des spécifications

Paramètre KSZ8041TL-S KSZ8041TL-TR
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type 10/100BASE-TX Ethernet physical-layer transceiver Ethernet interface IC / physical-layer transceiver
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Supply Voltage Range 3.135 V to 3.465 V —
Supply Configuration Single supply —
Supported Copper Ethernet Rates 10BASE-T and 100BASE-TX —
Host Interface MII, RMII, and SMII —
Boîtier 48-TQFP, 7 mm x 7 mm 48-TQFP (7 x 7 mm)
Type de montage Surface mount Surface mount
Target Packaging Tray —
Signaling Design Mixed-signal design —
100BASE-FX Support Not supported in KSZ8041TL-S —
Maximum Ethernet Data Rate 100 Mbit/s —
Minimum Ethernet Data Rate 10 Mbit/s —
Température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification Not applicable —
Automotive MDI/MDIX Support [DATA_NEEDED: automotive MDI/MDIX support] —
Media Interface Copper Ethernet through external magnetics —
Configuration Mechanism Power-up PHY strapping pins —
Product Type — 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Supply Architecture — Single-supply
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Tension d'alimentation — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis