KSZ8041TL-S vs KSZ8041TL-TR तुलना
विस्तृत दोनों ओर की तुलना KSZ8041TL-S द्वारा Microchip Technology और KSZ8041TL-TR द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Microchip Technology
KSZ8041TL-TR 10/100 Ethernet PHY | Microchip | TQFP-48 (Tape & Reel)
KSZ8041TL-TR ✓ सक्रियविशेषता तुलना
| पैरामीटर | KSZ8041TL-S | KSZ8041TL-TR |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Device Type | 10/100BASE-TX Ethernet physical-layer transceiver | Ethernet interface IC / physical-layer transceiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Supply Voltage Range | 3.135 V to 3.465 V | — |
| Supply Configuration | Single supply | — |
| Supported Copper Ethernet Rates | 10BASE-T and 100BASE-TX | — |
| Host Interface | MII, RMII, and SMII | — |
| पैकेज | 48-TQFP, 7 mm x 7 mm | 48-TQFP (7 x 7 mm) |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Target Packaging | Tray | — |
| Signaling Design | Mixed-signal design | — |
| 100BASE-FX Support | Not supported in KSZ8041TL-S | — |
| Maximum Ethernet Data Rate | 100 Mbit/s | — |
| Minimum Ethernet Data Rate | 10 Mbit/s | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | — |
| Automotive MDI/MDIX Support | [DATA_NEEDED: automotive MDI/MDIX support] | — |
| Media Interface | Copper Ethernet through external magnetics | — |
| Configuration Mechanism | Power-up PHY strapping pins | — |
| Product Type | — | 10BASE-T/100BASE-TX Ethernet physical-layer transceiver |
| Supported Data Rates | — | 10 Mb/s and 100 Mb/s |
| Host Interfaces | — | MII, RMII, and SMII |
| Supply Architecture | — | Single-supply |
| Cable Standard | — | 10BASE-T and 100BASE-TX |
| Mixed-Signal Design | — | Yes; intended to extend signaling distance while reducing power consumption |
| Auto MDI/MDIX | — | HP Auto MDI/MDIX |
| Interrupt Signal | — | INTRP on pin 32; optional PHY-register status-update signal |
| Number of Drivers/Receivers | — | 1 driver and 1 receiver |
| सप्लाई वोल्टेज | — | [DATA_NEEDED: supply voltage range] |
| Interface Clock | — | [DATA_NEEDED: clock frequency] |
| Ethernet Magnetics | — | [DATA_NEEDED: supported magnetics and isolation configuration] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |