KSZ9021RLI vs KSZ9021GQ Comparaison
Comparaison détaillée côte à côte de KSZ9021RLI par Microchip Technology et KSZ9021GQ par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ9021RLI - Gigabit Ethernet PHY Transceiver, RGMII, 64-LQFP-EP | Microchip
KSZ9021RLI ✓ Actif
Comparaison des spécifications
| Paramètre | KSZ9021RLI | KSZ9021GQ |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Fonction | 10/100/1000Base-T Ethernet PHY Transceiver | — |
| Number of Drivers/Receivers | 8/8 | — |
| Débit de données | 10 Mbps / 100 Mbps / 1000 Mbps | — |
| Protocol | Gigabit Ethernet IEEE 802.3 | — |
| IC Interface Type | GMII, MII, RGMII | — |
| Tension d'alimentation | 3.135 V to 3.465 V (3.3V nominal) | 3.3 V |
| Core/Logic Voltage | 1.14 V to 1.26 V (internal LDO) / 3.3 V interface | — |
| Température de fonctionnement | -40C to +85C (Industrial) | — |
| Boîtier | 64-LQFP-EP (10x10 mm) with Exposed Pad | 128-pin lead-free PQFP, 14 x 20 mm |
| Type de montage | Surface Mount | Surface mount |
| Auto-Negotiation | Yes (10/100/1000) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Cable Diagnostics | LinkMD TDR-based | — |
| Energy Efficient Ethernet | IEEE 802.3az supported | — |
| Niveau MSL | [DATA_NEEDED: MSL Level] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Termination | On-chip 100-ohm | — |
| Product Type | — | Single-port Gigabit Ethernet transceiver |
| Supported Ethernet Speeds | — | 10/100/1000 Mbps |
| Supported Media | — | 10/100/1000Base-T |
| Digital Host Interface | — | GMII/MII |
| GMII Data Rate | — | 1000 Mbps |
| MII Data Rates | — | 10 Mbps and 100 Mbps |
| Transceiver Classification | — | 8/8 transceiver |
| Auto-Negotiation Standard | — | IEEE 802.3 Clause 28 |
| Cable Type | — | UTP |
| Cable Diagnostic Method | — | Micrel LinkMD TDR-based diagnostics |
| Board Fault Detection | — | Parametric NAND tree support |
| Loopback Modes | — | Remote and local |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |