KSZ9021RLI vs KSZ9021GQ 比較

詳細並排比較 KSZ9021RLI 由 Microchip Technology 與 KSZ9021GQ 由 Microchip Technology. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Microchip Technology
KSZ9021GQ KSZ9021GQ - Gigabit Ethernet Transceiver | Microchip

KSZ9021GQ - Gigabit Ethernet Transceiver | Microchip

KSZ9021GQ Unknown

規格比較

參數 KSZ9021RLI KSZ9021GQ
品牌 Microchip Technology Microchip Technology
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 Unknown
功能 10/100/1000Base-T Ethernet PHY Transceiver —
Number of Drivers/Receivers 8/8 —
資料速率 10 Mbps / 100 Mbps / 1000 Mbps —
Protocol Gigabit Ethernet IEEE 802.3 —
IC Interface Type GMII, MII, RGMII —
供應電壓 3.135 V to 3.465 V (3.3V nominal) 3.3 V
Core/Logic Voltage 1.14 V to 1.26 V (internal LDO) / 3.3 V interface —
工作溫度 -40C to +85C (Industrial) —
封裝 64-LQFP-EP (10x10 mm) with Exposed Pad 128-pin lead-free PQFP, 14 x 20 mm
安裝類型 Surface Mount Surface mount
Auto-Negotiation Yes (10/100/1000) —
Auto-MDIX Yes (HP Auto-MDIX) —
Cable Diagnostics LinkMD TDR-based —
Energy Efficient Ethernet IEEE 802.3az supported —
MSL 等級 [DATA_NEEDED: MSL Level] —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Termination On-chip 100-ohm —
Product Type — Single-port Gigabit Ethernet transceiver
Supported Ethernet Speeds — 10/100/1000 Mbps
Supported Media — 10/100/1000Base-T
Digital Host Interface — GMII/MII
GMII Data Rate — 1000 Mbps
MII Data Rates — 10 Mbps and 100 Mbps
Transceiver Classification — 8/8 transceiver
Auto-Negotiation Standard — IEEE 802.3 Clause 28
Cable Type — UTP
Cable Diagnostic Method — Micrel LinkMD TDR-based diagnostics
Board Fault Detection — Parametric NAND tree support
Loopback Modes — Remote and local
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
工作溫度範圍 — [DATA_NEEDED: operating temperature range]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價