KSZ9031RNXCA vs KSZ9031RNXCC Comparaison
Comparaison détaillée côte à côte de KSZ9031RNXCA par Microchip Technology et KSZ9031RNXCC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ ActifComparaison des spécifications
| Paramètre | KSZ9031RNXCA | KSZ9031RNXCC |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Gigabit Ethernet physical-layer transceiver | Ethernet Physical Layer Transceiver (PHY) |
| Supported Speeds | 10 Mbps, 100 Mbps, and 1 Gbps | — |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, and 1000Base-T | — |
| Host Interface | RGMII | — |
| Data Path | 4-wire full-duplex Ethernet | — |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V | — |
| Analog Core Supply | 1.2 V | — |
| Boîtier | 48-pin QFN, 7 mm x 7 mm | 48-pin QFN (7x7 mm) |
| Type de montage | Surface mount | Surface Mount |
| Cable Diagnostics | LinkMD | — |
| Time-Domain Reflectometry Diagnostics | Supported TDR-based cable testing | — |
| Mode Configuration | MODE[3:0] strap inputs | — |
| Hardware Reset Input | RESET_N, pin 42 | — |
| Automotive Qualification | Automotive qualified | — |
| AVDDL Bulk Capacitance | 10 uF | — |
| AVDDL Local Decoupling | 0.1 uF per AVDDL pin | — |
| AVDDL Ferrite Bead Impedance | 100 ohm to 220 ohm at 100 MHz | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Débit de données | — | 10 / 100 / 1000 Mbps (triple-speed) |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) |
| MAC Interface | — | RGMII (Version 2.0 compliant, on-chip delay) |
| Cable Interface | — | 4 differential pairs, CAT-5 UTP, 100-ohm differential |
| Management Interface | — | MDIO / MDC (IEEE 802.3 clause 22/45) |
| Supply Voltage (Analog/DVDD) | — | 3.3 V |
| Core Supply | — | 1.2 V (on-chip LDO controller + external MOSFET) |
| On-chip Features | — | Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction |
| Power Saving | — | Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode |
| Température de fonctionnement | — | 0C to +70C (commercial grade, CC suffix) |
| Niveau MSL | — | 3 |