KSZ9031RNXCA vs KSZ9031RNXCC Vergleich
Detaillierter Direktvergleich von KSZ9031RNXCA von Microchip Technology und KSZ9031RNXCC von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ AktivSpezifikationsvergleich
| Parameter | KSZ9031RNXCA | KSZ9031RNXCC |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Gigabit Ethernet physical-layer transceiver | Ethernet Physical Layer Transceiver (PHY) |
| Supported Speeds | 10 Mbps, 100 Mbps, and 1 Gbps | — |
| Supported Ethernet Modes | 10Base-T, 100Base-TX, and 1000Base-T | — |
| Host Interface | RGMII | — |
| Data Path | 4-wire full-duplex Ethernet | — |
| Supply Voltage Options | 1.8 V, 2.5 V, and 3.3 V | — |
| Analog Core Supply | 1.2 V | — |
| Gehäuse | 48-pin QFN, 7 mm x 7 mm | 48-pin QFN (7x7 mm) |
| Montageart | Surface mount | Surface Mount |
| Cable Diagnostics | LinkMD | — |
| Time-Domain Reflectometry Diagnostics | Supported TDR-based cable testing | — |
| Mode Configuration | MODE[3:0] strap inputs | — |
| Hardware Reset Input | RESET_N, pin 42 | — |
| Automotive Qualification | Automotive qualified | — |
| AVDDL Bulk Capacitance | 10 uF | — |
| AVDDL Local Decoupling | 0.1 uF per AVDDL pin | — |
| AVDDL Ferrite Bead Impedance | 100 ohm to 220 ohm at 100 MHz | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Datenrate | — | 10 / 100 / 1000 Mbps (triple-speed) |
| Standards | — | IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) |
| MAC Interface | — | RGMII (Version 2.0 compliant, on-chip delay) |
| Cable Interface | — | 4 differential pairs, CAT-5 UTP, 100-ohm differential |
| Management Interface | — | MDIO / MDC (IEEE 802.3 clause 22/45) |
| Supply Voltage (Analog/DVDD) | — | 3.3 V |
| Core Supply | — | 1.2 V (on-chip LDO controller + external MOSFET) |
| On-chip Features | — | Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction |
| Power Saving | — | Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode |
| Betriebstemperatur | — | 0C to +70C (commercial grade, CC suffix) |
| MSL-Level | — | 3 |