LAN9730-ABZJ vs LAN9500A-ABZJ Comparaison
Comparaison détaillée côte à côte de LAN9730-ABZJ par Microchip Technology et LAN9500A-ABZJ par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
LAN9500A-ABZJ - Hi-Speed USB 2.0 to 10/100 Ethernet Bridge | Microchip
LAN9500A-ABZJ ✓ ActifComparaison des spécifications
| Paramètre | LAN9730-ABZJ | LAN9500A-ABZJ |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | USB 2.0 to 10/100 Ethernet controller | — |
| USB Interface | USB 2.0 | — |
| Host Interface | High-Speed Inter-Chip (HSIC) | — |
| Ethernet Speed | 10 Mbps and 100 Mbps | — |
| Ethernet Standards | IEEE 802.3 and IEEE 802.3u | — |
| Physical Layer | Integrated 10BASE-T and 100BASE-TX PHY | — |
| Tension d'alimentation | 1.2 V and 3.3 V | 3.3 V (single external; on-chip 1.2 V and 2.5 V LDOs) |
| Maximum Operating Voltage | 3.63 V | — |
| Minimum Operating Voltage | 2.97 V | — |
| Température de fonctionnement | 0°C to +70°C | 0 C to +70 C (commercial) |
| Internal Memory | 28 KB | — |
| Debug Interface | JTAG | — |
| Wake-Up Feature | USB wake-up | — |
| Reset Feature | Power-on reset | — |
| Status Indication | Programmable LED indication | — |
| Power Management | Low-power mode | — |
| Boîtier | 56-pin QFN exposed pad, 8 mm x 8 mm | 56-pin QFN (8x8 mm) |
| Type de montage | Surface mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Host USB Software Support | [DATA_NEEDED: Supported operating systems and USB driver versions] | — |
| Ethernet Magnetics | [DATA_NEEDED: Required magnetics and isolation configuration] | — |
| Junction Temperature | [DATA_NEEDED: Maximum junction temperature] | — |
| Résistance thermique | [DATA_NEEDED: Junction-to-ambient thermal resistance] | — |
| Fonction | — | USB 2.0 to 10/100 Ethernet Bridge Controller |
| USB Standard | — | USB 2.0 Hi-Speed (480 Mbps) |
| Ethernet Standard | — | IEEE 802.3 / 802.3u, 10/100 Base-T/TX |
| Integrated PHY | — | 10/100 Ethernet PHY + USB 2.0 PHY on-chip |
| Auto-Negotiation | — | Yes (IEEE 802.3u) |
| Auto-MDIX | — | Yes (HP Auto-MDIX) |
| ESD Protection (HBM) | — | ±8 kV |
| ESD Protection (Air Discharge) | — | ±15 kV |
| External Crystal | — | 25 MHz |
| External MII Interface | — | Yes (for external PHY expansion) |
| Address Filtering | — | 48-bit perfect + 64 hash-filtered multicast |