LM224DG vs LM324DG Comparaison
Comparaison détaillée côte à côte de LM224DG par onsemi et LM324DG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM224DG | LM324DG |
|---|---|---|
| Marque | onsemi | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Quad operational amplifier | — |
| Number of Channels | 4 circuits | 4 channels |
| Amplifier Type | General-purpose operational amplifier | Single-supply quad operational amplifier with true differential inputs |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V |
| Input Offset Voltage | 5 mV | 5 mV to 7 mV |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | True differential inputs |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Boîtier | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Slew Rate | — | 0.6 V/us |
| Minimum Common-Mode Rejection Ratio | — | 65 dB |
| Nombre de broches | — | 14 pins |
| Operating Temperature Grade | — | Commercial temperature grade |
| Power Supply Configuration | — | Single supply |
| Gain | — | [DATA_NEEDED: voltage gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |