LM224DG vs LM324DG Vergleich
Detaillierter Direktvergleich von LM224DG von onsemi und LM324DG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM224DG | LM324DG |
|---|---|---|
| Marke | onsemi | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Quad operational amplifier | — |
| Number of Channels | 4 circuits | 4 channels |
| Amplifier Type | General-purpose operational amplifier | Single-supply quad operational amplifier with true differential inputs |
| Gain-Bandwidth Product | 1 MHz | 1 MHz |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V |
| Input Offset Voltage | 5 mV | 5 mV to 7 mV |
| Common-Mode Rejection Ratio | 70 dB minimum | — |
| Input Type | True differential inputs | True differential inputs |
| Supply Configuration | Single supply or split supply | — |
| Compensation | Internally frequency compensated | — |
| Gehäuse | 14-pin SOIC, 0.154 inch (3.90 mm) width | 14-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | -25 C to +85 C | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Slew Rate | — | 0.6 V/us |
| Minimum Common-Mode Rejection Ratio | — | 65 dB |
| Anzahl der Pins | — | 14 pins |
| Operating Temperature Grade | — | Commercial temperature grade |
| Power Supply Configuration | — | Single supply |
| Gain | — | [DATA_NEEDED: voltage gain] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |