LM258DRE4 vs LM258AD Comparaison
Comparaison détaillée côte à côte de LM258DRE4 par Texas Instruments et LM258AD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM258DRE4 | LM258AD |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General-purpose operational amplifier | — |
| Number of Circuits | 2 circuits | — |
| Maximum Supply Voltage | 30 V | 30 V |
| Single-Supply Operating Range | Up to 26 V | — |
| Dual-Supply Operating Range | Up to 52 V total | — |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| Typical Supply-Current Drain | 0.7 mA | — |
| Plage de température de fonctionnement | -25°C to +85°C | -25°C to 85°C |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Input Bias Current | 20 nA | — |
| Maximum Differential Input Voltage | 32 V | — |
| Common-Mode Input Range | Includes ground | — |
| Boîtier | 8-SOIC, 3.90 mm body width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Shipping Package | Tape and reel | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Dual operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Unity-Gain Bandwidth | — | 1.1 MHz |
| DC Voltage Gain | — | 100 dB |
| Supply Current per Amplifier | — | 500 uA |
| Input Bias Current | — | 20 nA |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection status] |