LM258DRE4 vs LM258AD Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM258DRE4 disebabkan oleh Texas Instruments dan LM258AD disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | LM258DRE4 | LM258AD |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | General-purpose operational amplifier | — |
| Number of Circuits | 2 circuits | — |
| Maximum Supply Voltage | 30 V | 30 V |
| Single-Supply Operating Range | Up to 26 V | — |
| Dual-Supply Operating Range | Up to 52 V total | — |
| Gain-Bandwidth Product | 700 kHz | 700 kHz |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| Typical Supply-Current Drain | 0.7 mA | — |
| Gambaran Suhu Operasi | -25°C to +85°C | -25°C to 85°C |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Input Bias Current | 20 nA | — |
| Maximum Differential Input Voltage | 32 V | — |
| Common-Mode Input Range | Includes ground | — |
| Kemasan | 8-SOIC, 3.90 mm body width | 8-pin SOIC |
| Jenis Pemasangan | Surface mount | Surface mount |
| Shipping Package | Tape and reel | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Dual operational amplifier |
| Number of Amplifiers | — | 2 circuits |
| Unity-Gain Bandwidth | — | 1.1 MHz |
| DC Voltage Gain | — | 100 dB |
| Supply Current per Amplifier | — | 500 uA |
| Input Bias Current | — | 20 nA |
| Compensation | — | Internally frequency compensated |
| Supply Configuration | — | Single supply |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Current | — | [DATA_NEEDED: output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection status] |