LM2904D vs LM2904DG4 Comparaison
Comparaison détaillée côte à côte de LM2904D par Texas Instruments et LM2904DG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2904D - Dual 26V 700kHz Op Amp | Texas Instruments (Tape & Reel)
LM2904D ✓ ActifComparaison des spécifications
| Paramètre | LM2904D | LM2904DG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 | — |
| Supply Voltage (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±13 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | 0.3 V/µs |
| Input Offset Voltage | 2 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Quiescent Current (per amplifier) | 500 uA (typical) | — |
| Total Supply Current | 0.7 mA (typical) | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Output Stage | Class AB | — |
| Input Stage Latch-Up | Latch-up free | — |
| Short-Circuit Protection | Internal | — |
| Température de fonctionnement | -40C to +125C | — |
| Boîtier | 8-SOIC (D) | 8-SOIC (0.154, 3.90 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | — | 2 |
| Maximum Supply Voltage | — | 26 V |
| Single-Supply Operation | — | Up to 26 V |
| Dual-Supply Operation | — | Up to ±13 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Supply-Current Drain | — | 0.7 mA typical |
| Supply-Current Independence | — | Independent of supply voltage |
| Packaging | — | Tube |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |