LM2904D vs LM2904DG4 Perbandingan
Perbandingan bersamaan detil LM2904D dari Texas Instruments dan LM2904DG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2904D - Dual 26V 700kHz Op Amp | Texas Instruments (Tape & Reel)
LM2904D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2904D | LM2904DG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 2 | — |
| Supply Voltage (Single) | 3 V to 26 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±13 V | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/us | 0.3 V/µs |
| Input Offset Voltage | 2 mV (typical) | [DATA_NEEDED: input offset voltage] |
| Quiescent Current (per amplifier) | 500 uA (typical) | — |
| Total Supply Current | 0.7 mA (typical) | — |
| Common-Mode Input Range | Includes ground | Includes ground |
| Output Stage | Class AB | — |
| Input Stage Latch-Up | Latch-up free | — |
| Short-Circuit Protection | Internal | — |
| Suhu Kerja | -40C to +125C | — |
| Paket | 8-SOIC (D) | 8-SOIC (0.154, 3.90 mm width) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Amplifier Type | General Purpose | General Purpose |
| Number of Circuits | — | 2 |
| Maximum Supply Voltage | — | 26 V |
| Single-Supply Operation | — | Up to 26 V |
| Dual-Supply Operation | — | Up to ±13 V |
| Gain-Bandwidth Product | — | 700 kHz |
| Supply-Current Drain | — | 0.7 mA typical |
| Supply-Current Independence | — | Independent of supply voltage |
| Packaging | — | Tube |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Voltage Gain | — | [DATA_NEEDED: open-loop voltage gain] |
| Output Current | — | [DATA_NEEDED: output current] |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |