LM2904VQDRG4 vs LM2904VQDRG4Q1 Comparaison

Comparaison détaillée côte à côte de LM2904VQDRG4 par Texas Instruments et LM2904VQDRG4Q1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM2904VQDRG4 LM2904VQDRG4 - Dual 30V 700kHz Op Amp | Texas Instruments

LM2904VQDRG4 - Dual 30V 700kHz Op Amp | Texas Instruments

LM2904VQDRG4 ✓ Actif
Texas Instruments
LM2904VQDRG4Q1 LM2904VQDRG4Q1 - 26V Dual Op Amp | Texas Instruments

LM2904VQDRG4Q1 - 26V Dual Op Amp | Texas Instruments

LM2904VQDRG4Q1 ✓ Actif

Comparaison des spécifications

Paramètre LM2904VQDRG4 LM2904VQDRG4Q1
Marque Texas Instruments Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Dual operational amplifier Dual operational amplifier
Number of Amplifier Channels 2 channels —
Maximum Supply Voltage 30 V —
Single-Supply Operating Range 3 V to 30 V —
Dual-Supply Operating Range ±4.5 V to ±15 V —
Gain-Bandwidth Product 700 kHz 700 kHz
Courant de repos 500 µA per channel —
Plage de température de fonctionnement -40°C to 125°C -40°C to 125°C
Boîtier 8-pin SOIC (D) 8-SOIC (D)
Nombre de broches 8 pins —
Type de montage Surface mount Surface mount
Amplifier Classification General-purpose operational amplifier —
Automotive Qualification Qualified variant available as LM2904VQDRG4Q1 AEC-Q100 qualified
Input Offset Voltage [DATA_NEEDED: input offset voltage] 3 mV maximum
Input Bias Current [DATA_NEEDED: input bias current] [DATA_NEEDED: input bias current]
Output Current [DATA_NEEDED: output current] [DATA_NEEDED: output current]
Slew Rate [DATA_NEEDED: slew rate] 0.3 V/µs
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Input Range [DATA_NEEDED: common-mode input range] —
Output Swing [DATA_NEEDED: output voltage swing] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — General-purpose operational amplifier
Number of Circuits — 2 circuits
Tension d'alimentation — 26 V maximum
Supply Current per Channel — 500 µA typical
Nombre de broches — 8 pins
Packaging — Tape and reel
Low-Supply-Current Drain — Independent of supply voltage
Common-Mode Input Voltage Range — [DATA_NEEDED: common-mode input voltage range]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis