LM293DG vs LM2903VQDRQ1 Comparaison
Comparaison détaillée côte à côte de LM293DG par onsemi et LM2903VQDRQ1 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ ActifComparaison des spécifications
| Paramètre | LM293DG | LM2903VQDRQ1 |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Precision, dual, independent | Dual differential comparator |
| Number of Comparators | 2 | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Plage de température de fonctionnement | -25 C to +85 C | -40 °C to +125 °C |
| Input Offset Voltage | as low as 2.0 mV | — |
| Response Time | 1.3 microseconds | — |
| Courant d'alimentation | 400 microamps | — |
| Type de sortie | Open-collector / open-drain | Open-collector |
| Output Compatibility | CMOS, MOS, TTL, DTL, ECL | — |
| Common-Mode Input Range | Includes ground (single supply operation) | — |
| Boîtier | 8-SOIC (SOIC-8), 1.27 mm lead pitch | 8-pin SOIC (D) |
| Type de montage | Surface Mount | Surface mount |
| Channel Independence | Fully independent channels | — |
| Input Common-Mode Range | Ground to (V+) - 1.5 V (typical single-supply behaviour) | — |
| Output Sink Current | [DATA_NEEDED: output sink current rating] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Lead-Free / RoHS Status | [DATA_NEEDED: lead-free and RoHS status] | — |
| Number of Channels | — | 2 channels |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | ±1 V to ±18 V |
| Differential Input Voltage Range | — | Up to maximum-rated supply voltage |
| Common-Mode Input Voltage Range | — | Includes ground |
| Supply-Current Drain | — | 0.4 mA |
| Propagation Delay | — | Approximately 1.3 µs |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Automotive Qualification | — | AEC-Q100 Grade 0 and Grade 1 |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |