LM293DG vs LM2903VQDRQ1 对比
详细并排对比 LM293DG 出自 onsemi 和 LM2903VQDRQ1 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ 量产中规格对比
| 参数 | LM293DG | LM2903VQDRQ1 |
|---|---|---|
| 品牌 | onsemi | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Comparator Type | Precision, dual, independent | Dual differential comparator |
| Number of Comparators | 2 | — |
| Supply Voltage Range | 2 V to 36 V | — |
| 工作温度范围 | -25 C to +85 C | -40 °C to +125 °C |
| Input Offset Voltage | as low as 2.0 mV | — |
| Response Time | 1.3 microseconds | — |
| 电源电流 | 400 microamps | — |
| 输出类型 | Open-collector / open-drain | Open-collector |
| Output Compatibility | CMOS, MOS, TTL, DTL, ECL | — |
| Common-Mode Input Range | Includes ground (single supply operation) | — |
| 封装 | 8-SOIC (SOIC-8), 1.27 mm lead pitch | 8-pin SOIC (D) |
| 安装类型 | Surface Mount | Surface mount |
| Channel Independence | Fully independent channels | — |
| Input Common-Mode Range | Ground to (V+) - 1.5 V (typical single-supply behaviour) | — |
| Output Sink Current | [DATA_NEEDED: output sink current rating] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Differential Voltage Range | [DATA_NEEDED: input differential voltage range] | — |
| Lead-Free / RoHS Status | [DATA_NEEDED: lead-free and RoHS status] | — |
| Number of Channels | — | 2 channels |
| Supply Voltage Range, Single Supply | — | 2 V to 36 V |
| Supply Voltage Range, Dual Supply | — | ±1 V to ±18 V |
| Differential Input Voltage Range | — | Up to maximum-rated supply voltage |
| Common-Mode Input Voltage Range | — | Includes ground |
| Supply-Current Drain | — | 0.4 mA |
| Propagation Delay | — | Approximately 1.3 µs |
| Logic Compatibility | — | TTL, MOS, and CMOS compatible |
| Automotive Qualification | — | AEC-Q100 Grade 0 and Grade 1 |
| Package Width | — | 3.90 mm |
| Package Length | — | 0.154 inch |
| RoHS 状态 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |