LM358D vs LM358BAIDR Comparaison
Comparaison détaillée côte à côte de LM358D par Texas Instruments et LM358BAIDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
LM358D - Dual 700kHz General Purpose Op Amp | Texas Instruments (Tape & Reel)
LM358D ✓ ActifComparaison des spécifications
| Paramètre | LM358D | LM358BAIDR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | General Purpose Operational Amplifier | — |
| Number of Circuits | 2 | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage (Single) | 3 V to 32 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±16 V | — |
| Supply Current (per channel) | 0.7 mA (typ) | — |
| Input Offset Voltage | 2 mV (typ), 7 mV (max) | — |
| Common-Mode Input Range | Extends to ground (V-) | — |
| Output Current | 20 mA (typ, short-circuit protected) | — |
| Minimum Load Resistance | 2 kΩ | — |
| Température de fonctionnement | 0°C to +70°C | — |
| Boîtier | SOIC-8 (D) | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Internal Compensation | Yes (unity-gain stable) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual operational amplifier |
| Number of Amplifier Channels | — | 2 circuits |
| Maximum Supply Voltage | — | 36 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Offset Voltage | — | 2 mV |
| Plage de température de fonctionnement | — | -40°C to 85°C |
| Supply Configuration | — | [DATA_NEEDED: single or dual supply configuration] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |