LM358D vs LM358BAIDR So sánh
So sánh chi tiết song song của LM358D bằng Texas Instruments và LM358BAIDR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
LM358D - Dual 700kHz General Purpose Op Amp | Texas Instruments (Tape & Reel)
LM358D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM358D | LM358BAIDR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Amplifier Type | General Purpose Operational Amplifier | — |
| Number of Circuits | 2 | — |
| Gain Bandwidth Product | 700 kHz | — |
| Slew Rate | 0.3 V/µs | [DATA_NEEDED: slew rate] |
| Supply Voltage (Single) | 3 V to 32 V | — |
| Supply Voltage (Dual) | ±1.5 V to ±16 V | — |
| Supply Current (per channel) | 0.7 mA (typ) | — |
| Input Offset Voltage | 2 mV (typ), 7 mV (max) | — |
| Common-Mode Input Range | Extends to ground (V-) | — |
| Output Current | 20 mA (typ, short-circuit protected) | — |
| Minimum Load Resistance | 2 kΩ | — |
| Nhiệt độ hoạt động | 0°C to +70°C | — |
| Hộp | SOIC-8 (D) | 8-SOIC |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Internal Compensation | Yes (unity-gain stable) | — |
| Trạng thái RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Dual operational amplifier |
| Number of Amplifier Channels | — | 2 circuits |
| Maximum Supply Voltage | — | 36 V |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Offset Voltage | — | 2 mV |
| Khoảng nhiệt độ hoạt động | — | -40°C to 85°C |
| Supply Configuration | — | [DATA_NEEDED: single or dual supply configuration] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Short-Circuit Protection | — | [DATA_NEEDED: short-circuit protection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |