LM358N vs LM2904VN Comparaison

Comparaison détaillée côte à côte de LM358N par Texas Instruments et LM2904VN par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
LM358N LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier

LM358N - Dual 32 V 1 MHz Op Amp | DIP-8 Amplifier

LM358N ✓ Actif

Comparaison des spécifications

Paramètre LM358N LM2904VN
Marque Texas Instruments onsemi
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Dual operational amplifier —
Number of Amplifiers 2 independent amplifiers —
Maximum Supply Voltage 32 V —
Typical Gain-Bandwidth Product 1 MHz —
Input Type Differential input —
Frequency Compensation Internally frequency compensated —
Supply Configuration Single supply operation emphasized in the verified LM358 family description —
Boîtier 8-pin mini-DIP or 8-pin PDIP, depending on manufacturer source 8-PDIP (0.300 in, 7.62 mm)
Type de montage Through-hole Through Hole
Nombre de broches 8 pins —
Input Bias Current [DATA_NEEDED: input bias current] 45 nA
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Slew Rate [DATA_NEEDED: slew rate] 0.6 V/us
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Courant d'alimentation [DATA_NEEDED: supply current] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
Noise [DATA_NEEDED: noise voltage or noise density] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Standardized Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — General Purpose / Instrumentation, Op Amp, Buffer
Number of Circuits — 2
Gain Bandwidth Product — 1 MHz
Supply Voltage Range (Single) — 3 V to 26 V
Supply Voltage Range (Total) — 3 V to 32 V
Supply Voltage Range (Split) — +/-1.5 V to +/-16 V
Open Loop Gain — 70 dB
Common Mode Input Range — Extends to ground / VEE
Supply Operation — Single supply or split supply
Température de fonctionnement — [DATA_NEEDED: operating temperature range]
Power Drain — Low power drain (per manufacturer description)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis