M29W160FB70N3E vs M29W160EB70N3F Comparaison

Comparaison détaillée côte à côte de M29W160FB70N3E par Micron Technology et M29W160EB70N3F par Micron Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Micron Technology
M29W160FB70N3E M29W160FB70N3E - 16Mb 3V Parallel NOR Flash 70ns | Micron

M29W160FB70N3E - 16Mb 3V Parallel NOR Flash 70ns | Micron

M29W160FB70N3E ✓ Actif
Micron Technology
M29W160EB70N3F M29W160EB70N3F - 16Mbit NOR Flash, 70ns, 48-TSOP | Micron

M29W160EB70N3F - 16Mbit NOR Flash, 70ns, 48-TSOP | Micron

M29W160EB70N3F ✓ Actif

Comparaison des spécifications

Paramètre M29W160FB70N3E M29W160EB70N3F
Marque Micron Technology Micron Technology
Catégorie Memory ICs Memory ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $3,58 $1,01
Type de mémoire FLASH - NOR FLASH - NOR
Taille de mémoire 16 Mbit (2M x8 / 1M x16) 16 Mbit (2M x8 / 1M x16)
Access Time 70 ns 70 ns
Interface Parallel Parallel (Byte/Word-wide)
Supply Voltage (VCC) 3.0 V to 3.6 V 2.7 V to 3.6 V
Programming Voltage Single supply (no separate VPP required) —
Bus Configuration x8 / x16 selectable (BYTE# pin) x8 / x16 selectable (BYTE# pin)
Architecture Boot block —
Boîtier / Format 48-TFSOP (0.724 in, 18.40 mm width) 48-TSOP (0.724 in, 18.40 mm width)
Type de montage Surface Mount Surface Mount
Packaging Tray Tape & Reel
Température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Program/Erase Endurance [DATA_NEEDED: program/erase cycles] —
Data Retention [DATA_NEEDED: data retention] —
Status Output Data polling / toggle bit —
Block Protection Yes (boot block protection) —
Programming Time — 10 us per byte/word (typical)
Boot Block Position — Bottom boot block
Qualification — Automotive, AEC-Q100
Erase Architecture — Block erase (boot block + main blocks)
Common Flash Interface — Yes (CFI compliant)
Reset Input — RESET# hardware reset pin
Niveau MSL — [DATA_NEEDED: moisture sensitivity level]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis