MAX1069AEUD+T vs LTC2309IF Comparaison
Comparaison détaillée côte à côte de MAX1069AEUD+T par Analog Devices et LTC2309IF par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX1069AEUD+T | LTC2309IF |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,78 | $9,50 |
| Résolution | 14 bits | 12 bit |
| Fréquence d'échantillonnage | 58.6 ksps | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation Register) |
| Number of Input Channels | 1 single-ended | 8 single-ended / 4 differential |
| Input Type | Single-ended analog input | — |
| Analog Supply Voltage | +2.7 V to +5.25 V | — |
| Digital Supply Voltage | [DATA_NEEDED: digital supply range] | — |
| Internal Reference Voltage | +4.096 V | — |
| External Reference Support | [DATA_NEEDED: external REF input range] | — |
| Serial Interface | I2C-compatible 2-wire (Fast-mode and High-speed mode) | — |
| I2C Address Pins | ADD0-ADD3 (up to 16 devices on one bus) | — |
| On-Chip Clock | 4 MHz internal | — |
| Power-Down Mode | Automatic between conversions | — |
| Boîtier | 14-pin TSSOP | 20-TSSOP (FE) |
| Plage de température de fonctionnement | [DATA_NEEDED: temperature grade] | — |
| Type de montage | Surface Mount | — |
| Statut RoHS | Compliant | Compliant (PBF suffix) |
| Lead-Free | Yes | — |
| Conversion Time | — | 1.3 us per channel (typical) |
| Throughput Rate | — | up to 500 ksps (datasheet-dependent) |
| Supply Voltage (VDD) | — | 5 V single supply |
| Courant d'alimentation | — | 300 uA at 1 ksps (typical) |
| Digital Interface | — | I2C-compatible, standard / fast / high-speed modes |
| I2C Address Selection | — | 2 pins (AD0, AD1) - up to 4 devices on one bus |
| Internal Reference | — | 2.5 V, 10 ppm/C typical drift |
| External Reference Input (REFIN) | — | Yes, supports ratiometric operation |
| Sample-and-Hold | — | Fully differential, common-mode noise rejection |
| Analog Input Range | — | 0 V to VDD (unipolar); +/-VREF differential |
| Operating Temperature Range (I grade) | — | -40 C to +85 C |
| Courant d'arrêt | — | Nap / I2C power-down supported |