MAX1069AEUD+T vs LTC2309IF Сравнение

Подробное сравнение бок о бок MAX1069AEUD+T от Analog Devices и LTC2309IF от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Analog Devices
MAX1069AEUD+T MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

MAX1069AEUD+T - 14-Bit 58.6ksps I2C SAR ADC | Analog Devices

MAX1069AEUD+T ✓ Активен
Analog Devices
LTC2309IF LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF - 12-Bit 8-Ch SAR ADC, I2C, 5V | Analog Devices

LTC2309IF ✓ Активен

Сравнение характеристик

Параметр MAX1069AEUD+T LTC2309IF
Бренд Analog Devices Analog Devices
Категория ADC/DAC ADC/DAC
Статус жизненного цикла Активен Активен
Наличие In Stock In Stock
Цена за единицу (USD) $3,78 $9,50
Разрешение 14 bits 12 bit
Частота дискретизации 58.6 ksps —
Architecture SAR (Successive Approximation) SAR (Successive Approximation Register)
Number of Input Channels 1 single-ended 8 single-ended / 4 differential
Input Type Single-ended analog input —
Analog Supply Voltage +2.7 V to +5.25 V —
Digital Supply Voltage [DATA_NEEDED: digital supply range] —
Internal Reference Voltage +4.096 V —
External Reference Support [DATA_NEEDED: external REF input range] —
Serial Interface I2C-compatible 2-wire (Fast-mode and High-speed mode) —
I2C Address Pins ADD0-ADD3 (up to 16 devices on one bus) —
On-Chip Clock 4 MHz internal —
Power-Down Mode Automatic between conversions —
Корпус 14-pin TSSOP 20-TSSOP (FE)
Диапазон рабочих температур [DATA_NEEDED: temperature grade] —
Тип монтажа Surface Mount —
Статус RoHS Compliant Compliant (PBF suffix)
Lead-Free Yes —
Conversion Time — 1.3 us per channel (typical)
Throughput Rate — up to 500 ksps (datasheet-dependent)
Supply Voltage (VDD) — 5 V single supply
Ток потребления — 300 uA at 1 ksps (typical)
Digital Interface — I2C-compatible, standard / fast / high-speed modes
I2C Address Selection — 2 pins (AD0, AD1) - up to 4 devices on one bus
Internal Reference — 2.5 V, 10 ppm/C typical drift
External Reference Input (REFIN) — Yes, supports ratiometric operation
Sample-and-Hold — Fully differential, common-mode noise rejection
Analog Input Range — 0 V to VDD (unipolar); +/-VREF differential
Operating Temperature Range (I grade) — -40 C to +85 C
Ток выключения — Nap / I2C power-down supported

Даташиты & ресурсы

Все товары Создать BOM Запросить цену